Stainless steel gear pump suddenly stopped in use for several reasons

A few days ago, I received a call from a customer in Guangzhou. He mentioned that he owns a factory and recently purchased a few stainless steel gear pumps. However, one of the pumps started having issues—after running for a short time, the temperature rose too high, and the pump would lock up. He had to wait for it to cool down before it could be used again. After checking online, he found our company's information and reached out to us for help. Our technical team guided him through the issue, which turned out to be related to the shaft head. He learned about the problem, reinstalled the components according to our instructions, and now the pump is working properly again. Let me briefly explain some common reasons why a stainless steel gear pump might lock up: First, if the gears are not properly nitrided or quenched, they can be too soft, leading to sticking during operation. Second, excessive operating temperatures can cause parts to expand or seize, resulting in the pump locking. Third, during assembly, if burrs or debris are not fully removed, especially with materials like 0Cr18Ni9 stainless steel that tend to be sticky, this can lead to local jamming. Fourth, if the new piping wasn't cleaned properly, small amounts of welding slag or foreign particles could enter the pump, causing it to malfunction or lock up entirely. It's important to ensure proper installation, cleaning, and maintenance to avoid such issues. This case was resolved successfully thanks to clear communication and technical support. It's always good to have a reliable partner when dealing with industrial equipment.

3L Electric Wallpaper Stripper

The 2200W 3L Electric Steam Wallpaper strippers is the most productive, safest and easiest to use steam wallpaper stripper.

The Wallpaper Stripper force steam through the layers of paper, helping to not only remove the paper but also glue residue from walls.The Wallpaper Steam Stripper is particularly effective on stubborn papers with paint on, or wood chip paper.

The Electric Wallpaper Remover Stripper is much easier, compared to soak and scrap off the wallpaper manually, it only uses water which is heated.

The 3L Electric Wallpaper Stripper With overload protector which allows the excess steam to be released, to protect your safety.

Simply fill with hot or cold tap water and connect to the power supply. The Electric Wallpaper Stripper will steam-up in 10 minutes and continue to run for around 45 minutes, before switching off automatically when a low water level is reached.

The user then simply disconnects the Wallpaper Stripper from the power supply, waits 2 minutes to allow the steamer to cool, and then refills. This eliminates the need for the user to remember to constantly check the water level. Even if it is left connected to the power supply with a low water level it will safely switch on and off as the heating element cools down and heats up.

3L Electric Wallpaper Stripper,Electric Wallpaper Steamer,2000W Electric Wallpaper Stripper 240V,3L Wax Melter For Melting Wax

Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com