Wooden bath maintenance key

The key to the maintenance of wooden bath tubs With the increasing demands of modern people on the quality of life of sanitary wares, the new bathtub products can not meet the preferences of modern people. On the contrary, traditional wooden bath tubs are more popular among consumers, due to wood. The special nature of the bath material, plus the bathroom is a relatively humid environment, so consumers must pay attention to its maintenance during daily use. The details of the maintenance of the wooden tub are:

1. Consumers should pay attention to the first day they buy. After the barrel is delivered to the home, the consumer should check the quality again: whether there is crack, whether the wire is loose at the joint, whether the material is consistent with the selected sample. In addition, most of the newly bought wooden barrels will be coated with a layer of tung oil, and its taste tends to last for a long time. Therefore, in the first few days, it is necessary to keep the air circulation in the bathroom and regularly open the window to change the air, so as not to make the home full of thorns. The taste of the nose.

2. The initial test of water will see water seepage. This is a normal phenomenon. After the water is full, it should be soaked for more than 12 hours to fully infiltrate the wooden barrel. At this time, the water seepage phenomenon of the wooden barrel will stop. If there are still problems, find the manufacturer in time. Contact, the purpose of this is to allow the wooden tub to restore its normal water absorption.

3, use it once a day or two or three days, after the shower, drain the dirty water from the bucket and rinse it with water to prevent the growth of bacteria.

4. Because the wood itself will expand and contract, it should not be directly exposed to the sun or blown by cold air. If it does not need to be used for more than 2 months, the wooden barrel can be wetted and sealed with a large plastic bag to prevent the air from taking away moisture.

5, usually put a little water, so that it absorbs moisture, keeping the wood saturated and moist. But don't put too much water, because the bathroom itself has a certain humidity. Be careful not to leave dirty water after bathing, so as to prevent wood from absorbing sewage and accelerating aging or causing mold spots.

6. After using the wooden barrel for a period of time, the wire fixed outside the barrel will be loose. At this time, the wooden barrel can be inverted and the iron wire can be tightened.

7. The thickness of the wood on the barrel wall will be different. Generally, the barrel with a wall thickness between 2 cm and 3 cm is selected, and the heat preservation effect is the best.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

Roof Panel Roll Forming Line

Metal Roofing Machine,Roof Panel Roll Forming Machine,Roof Roll Forming Machine,Metal Roofing

Xinxiang Tianfeng Machinery Manufacture Co., Ltd. , https://www.frollforming.de