Home Cleaning Before cleaning up, prepare the necessary cleaning equipment such as buckets, towels, mops and detergents before starting work. When cleaning, you can also put a small cushion on the middle of the room to place these utensils.
Many cleaners also have their own little tricks. They wear aprons with carry-on bags. Small brushes, small blades, wet and dry cloths, garbage bags, etc. are available in the bag, which can be used at any time during the cleaning process. This saves time.
The correct sequence of home cleaning first step: first use a broom, vacuum cleaner, etc. to clean the dust on the surface of the house.
The second step: According to the principles from the inside to the outside, generally start from the master position in the innermost position of the location; when dragging the floor, pay attention to the principle from the corner to the middle and from the inside to the outside. The wardrobe and other furniture in the bedroom should also follow the top-down cleaning principles.
The third step: After the master bedroom and the second bedroom are cleaned, do the cleaning of the study.
Step 4: The cleaning of the balcony should be started from the guardrail to the glass. When cleaning the glass, dismantle the screen first, clean it, place it to dry, and then clean the glass frame from top to bottom. Then use a glass to clean the glass surface. The screens basically dry and they are replaced.
Step 5: Go to the kitchen and start the kitchen cleaning. The kitchen cleaning should pay attention to wipe high places, corners, and places that are easily overlooked with the small tools that you can carry.
Step 6: Go back to the living room to clean the living room.
Step 7: Finally, the public toilets will be fully cleaned.
Misunderstandings for cleaning errors 1: Wash household appliances back and forth. “When cleaning, see which corner home appliances need to be cleaned, and immediately move to the washing area to rinse. This method takes time and effort and has secondary pollution.†In fact, some The method of a professional cleaner is to directly prepare the detergent or wet rag and solve the problem directly during the cleaning process. For example, when cleaning the room, remove some lamp shades and other room utensils by using the portable gadgets and wash directly with water. Or wipe it clean with a rag to improve efficiency and cleanliness."
Myth 2: The greater the detergent concentration, the better the detergent is used. It is not necessarily the greater the concentration, the better the washing effect. In fact, if the concentration of the detergent exceeds the critical concentration, the detergent residue tends to be generated because the concentration is too high, and the possibility of wiping off or forming a trace of lines may easily occur. In fact, increasing the temperature of the detergent, such as dilution with warm water, can better exert its effect of removing dirt.
Clever use of daily necessities to clean the small cups of hot cup plate will leave a circle of hot marks in the furniture paint surface, with kerosene, alcohol, toilet water or strong tea wipe wet wipe; can also be coated with a layer of iodine or vaseline oil , Then wipe it with a rag every two days.
After the trademark on the furniture is wiped off, it will leave adhesive residue, and it can be erased with a rough eraser. Chewing gum on the floor also tried this method.
The white desk and white chair in your home are easy to get dirty. Try to use toothpaste to remove the dirt by gently rubbing it on a clean cloth. However, do not use too much force so as not to injure the paint.
If the furniture paint is scratched but it does not touch the wood, use a crayon or paint that matches the color of the furniture to apply it on the wound surface, then use a thin layer of transparent nail polish to wipe it.
The Fiber Laser Cutting Machine adopts servo motor bilateral driving. The whole machine is compact in structure, good in overall rigidity, stable in accuracy and performance. The equipment processing replaces the traditional mechanical knife with invisible beam. It has high processing precision, fast cutting and no damage to materials. The surface can be processed with any pattern. It is used for cutting and cutting carbon steel, alloy steel, stainless steel, copper, aluminum and galvanized sheet. It is a high-tech product integrating advanced technologies such as laser technology, mechanical technology and numerical control technology.
Performance characteristics:
1) The closed fiber Laser Cutting Machine has low cost and consumes less power,it can blow air to cut all kinds of metal sheets
2) High performance, imported fiber laser, stable performance, long service life.
3) High speed, high efficiency, up to 100 meters per minute.
4) Lasers are maintenance-free.
5) The cutting quality is good, the deformation is small, the appearance is smooth and beautiful.
6) The use of imported guide transmission mechanism and servo motor, cutting precision.
7) Can desian any kind of graph or text to cut at will, the operation is simple, flexible, convenient.
Fully Enclosed Fiber Laser Cutting Machine
Fiber Cutting Machine,Fully Enclosed Cutting Machine,Die Board Laser Cutting Machine,Fully Enclosed Fiber Laser Cutting Machine
Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com