What should I do with water spots on the stone?
If the stone is used in the wrong way, especially in the damp places, such as the stone in the kitchen or bathroom, it is very prone to water spots during use. How to remedy this phenomenon?
1, physical baking method
This method mainly uses the effect of high temperature and high heat to precipitate the moisture in the alkali-silica body, and then turns it into a solid colloid, and then uses a stone curing agent for waterproof treatment. Since this method only deals with the surface part of the stone, when the alkali-silica body becomes solid, it will immediately absorb water from the bottom and the surrounding of the stone to re-form the water spot.
2, chemical cleaning method
This method mainly uses the stone water spot remover to clean, remove or destroy the alkali or alkali-silicic acid gel (CSH) which forms the water spot in the stone, so that it loses the moisture absorption capacity, thereby achieving the purpose of controlling the water spot. .
3, cleaning and baking comprehensive method
The stone water spot remover is used to remove or destroy the alkali-silicic acid gel (CSH) which forms the water spot in the stone, and then the moisture in the stone is baked by the baking method.
4, brightening color method
The brightening method is to increase the color of the lighter part of the stone with water spot lesions by the method of color enhancement, so that it can reach the same or close to the color of the dark part of the stone, thereby achieving an aesthetic decorative effect.
However, at present, the effect of water spot treatment is still not ideal, so the prevention of water spots is particularly important, which requires consumers to pay more attention to the use of stone, and develop good habits.
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Agrochemical Intermediates,CAS 7446-70-0,Vitamin H,Hight Purity Dimethyldichlorosilane
Quzhou CanWin New Material Co., Ltd. , https://www.canwinnm.com