In the future, furniture will not be destroyed after it is sent for inspection, and it can continue to be used. Yesterday, the reporter learned that the National Standard for Limits of Hazardous Substances in Wood Furniture (Revised) has been drafted. According to the new standard, the furniture in the future can be placed in the environmental climate chamber for hazardous substances detection, and the furniture will not be damaged after the inspection. Yesterday afternoon, the National Furniture and Indoor Environmental Quality Supervision and Inspection Center laboratory held an open event. The reporter learned at the scene that at present, the furniture inspection is charged on a per-piece basis, and the cost of testing each piece of furniture is about 500 yuan. The detection method is based on the difference in material composition, sampling separately, and then the sample is placed in standard air for extraction and analysis, and non-destructive detection methods will be added in the future. According to Li Jiguang, deputy director of the National Furniture and Indoor Environmental Quality Supervision and Inspection Center, the center has 11 large-scale environmental climate chambers, the largest 30 cubic meters, the smallest 1 cubic meter, for the overall inspection of furniture. “This method ensures that the furniture will not be destroyed after inspection and can continue to be usedâ€. It is reported that the National Standard for the Limitation of Hazardous Substances in Wood Furniture (revised), which was drafted by the Center, has been completed. According to the standard, the furniture can be inspected at a constant temperature and humidity of 23 ° C and a humidity of 45%. Once the new national standard is introduced, sofas, mattresses, etc. can also be non-destructively tested according to this method.
Frequency Emitter,Crown And Adapter,Lock Tubular Motor,Popular Design Key Selector
Zhejiang Huzhou SCVE Machine & Motor Co., Ltd. , https://www.scve-motor.com