Now I am decorating the house, but everyone just wants to decorate the interior into a beautiful, clean, comfortable and comfortable place. So, do friends know that there are renovation steps in the decoration room? Especially in our decoration room, there should be no need. What do you pay attention to? Then let me tell you about the interior decoration process . Please see the following. If you have any questions about the decoration, you can also pay attention to our decoration home. network.
First, the decoration process
1. Do the pre-design first, mainly according to your own living habits, and make a detailed measurement of your room. Don't be lazy, it is best to measure it yourself.
2, but also to identify the area involved in the renovation process, especially the tile area, wall paint area, wallpaper area, floor area. Defining the main wall dimensions, especially the size of the wall where the furniture should be designed later.
3. The hydropower transformation project should be carried out. Before the water circuit transformation, the main structure demolition should be basically completed. Between the two aspects of hydropower transformation and main body demolition.
4. Installation of door stone and marble window sill. The installation of the stone can be done with the paving slabs. After the paving slabs, the installation of the marble sills is usually done after the window sills are completed.
5. The marble-installed workers will prepare the glass glue, and the marble and window cover will be sealed with glass glue.
6. The installation of the curtain rod marks the basic end of the home improvement. Before the pioneering cleaning, do not install curtains. When the pioneering cleaning, do not have furniture and unnecessary household appliances at home, try to maintain more "flat", so that the pioneering cleaning can be thoroughly cleaned.
7. Regarding the purchase time of furniture, my suggestion is that after the completion of the water circuit transformation, the basic size range of the furniture is only roughly in our hearts.
8. Therefore, some friends have been eager to order furniture before the renovation has begun. Personal feeling is not necessary. At this time, the home appliance should enter the market, the installation of the installation, ready to stay.
Second, matters needing attention
1. The wall-cutting trough is a project of three and a half cut-offs in the renovation of new houses. The precondition for a buried pipeline is to groove the wall and the ground, so that it can be buried in the pipeline.
2. However, some workers will have doubts about rough construction when they perform wall troughing operations. This will not only damage the load-bearing structure of the house, but also damage other adjacent pipelines.
3. Paving wall tiles and floor tiles must be cleaned at the base level before they can be constructed. Resolutely prevent wall tiles and tiles from being directly placed on the exterior of lime mortar, lime paste, paper lime paste, mortar and lime paint and latex paint.
4. Strictly distribute the bonding paste used between the tile and the substrate in accordance with the construction specifications and share. If you are not able to exchange data at will, you must use the standard cement and adhesive information.
5, before painting the latex paint, first check whether the wall putty is even, smooth, sanding and roller coating is not in place.
Now that everyone has read the above content, is it better than before that we know that there is a process in our decoration room, and we also know what some things should be noticed in the decoration room. Xiaobian tells you that there is a lot of decoration information in our decoration home network. You can always pay attention to our website. Thank you for reading this.
More related wonderful reading:
What is the decoration process? Introduction to the renovation process
Interior decoration flow step clothing store decoration process steps
New house renovation process introduces new house decoration considerations
What is the home renovation process? Home renovation steps
House renovation process steps house decoration precautions
Shower Sealing Strip is a unique concept that closes the gap between the shower screen/ glass panels, one of the easiest way to prevent water damage in your bathroom. A range of Shower Seals and Threshold made from high quality vinyls, available in transparent variations with the strength allows for a long lasting seal.
Specification
1. Material: PVC / PVC+ Magnet
2. Sealing Strip for shower door & bath screens: Glass to Wall or Glass to Floor
Translucent shower seals with soft bubble seal for interfaces between the bottom edge of the glass door and shower tray / top of the bath (horizontally) or between the wall and the edge of the glass door (vertically)
3. Glass Thickness: 6mm, 8mm, 10mm or 12mm
4. Length: 2200mm, can easily be cut to the required length , accept customized length
5. Application: Suits Shower enclosure, Bath Screen or Wet Room
Sealing Strip
Sealing Strip,Shower Door Plastic Seal,Shower Screen Seal,Shower Door Seal
Jiangyi Industrial Co., Ltd , https://www.cnjyhardware.com