After three to five years, solid wood flooring may begin to show signs of aging. Many homeowners choose to renovate their existing floors for both economic and practical reasons. Refurbishing solid wood floors not only saves money but also retains the natural wood texture and reduces the risk of cracking. Most importantly, this process can be done on-site without significantly disrupting daily life.
**On-site Refurbishment of Solid Wood Flooring**
If your solid wood floor shows signs of lifting, warping, discoloration, or deformation after years of use, it's a good time to consider renovation. Experts recommend planning a renovation after about five years of use. According to Hong Jinshan, deputy director of Dazhongsi Store, on-site refinishing typically costs around 40 yuan per square meter.
The process involves sanding the surface with progressively finer sandpaper to create a smooth finish. Afterward, putty is applied to fill in any imperfections, followed by a primer coat. Once dry, a topcoat is applied, and then the surface is lightly sanded with water sandpaper to ensure adhesion. This process is repeated six times before applying floor wax to seal and protect the surface.
**Factory Refurbishment for High-Value Woods**
For high-value woods like teak or red sandalwood, it’s better to return the floor to the factory for professional refurbishment. This method involves removing the floor and transporting it back to the factory, where environmentally friendly water-based paints are used to avoid strong odors. The paint must be specially formulated to provide sufficient wear resistance.
For minor scratches or damage, a special mop and polish can be used to restore the surface. However, if the floor has significant warping or tidal effects, it may be difficult to fix through standard refurbishment. Factory-refurbished floors tend to be more consistent and durable, though the cost is higher—approximately 80–100 yuan per square meter, including disassembly and reinstallation fees.
**Important Note: Non-Solid Wood Flooring Not Recommended for Renovation**
Non-solid wood flooring, such as composite or laminate, is generally not suitable for traditional renovation methods. These floors have inner layers made of materials like particleboard or MDF, which can easily become damaged during sanding. However, there are now surface treatment products available that allow for quick and easy refinishing of non-solid wood floors at a lower cost (around 15–20 yuan per square meter), with results lasting up to one year.
**Reader Q&A: How to Clean the Ceiling Properly**
Reader Mr. Wang asked about cleaning the ceiling, noting that it feels loose and weak after cleaning. Cui Tao, manager of the decoration engineering department, explained that modern integrated ceilings, especially in kitchens and bathrooms, are usually made of aluminum alloy panels. While they are resistant to dirt, long-term neglect can affect their appearance.
These ceilings are modular, allowing for easy access during repairs. However, it's advised not to remove them yourself, as improper reinstallation may cause gaps or uneven seams. To clean safely, spray a small amount of detergent on the surface, then gently scrub with a soft cloth. Avoid using harsh materials like steel wool, as they can scratch the panels. Always apply light pressure on the edges to maintain the ceiling’s flatness.
By following these tips, you can keep your home looking fresh and well-maintained without unnecessary disruption. Written by Li Ling, Beijing News Reporter.
Rectangular Hollow Section,Hollow Section Steel,Steel Box Profile,Metal Box Section
Guangdong Tianchen Steel Structure Engineering Co. Ltd. , https://www.tcsteeltech.com