Smart lock how to set the administrator

With the development of science and technology, people are increasingly demanding home environment, and smart locks are no longer the standard for high-end luxury homes. When the smart lock is used high, an administrator must be set up. The administrator has the right to control the password, fingerprint entry, open door record query, delete, etc. Therefore, the administrator should choose to be familiar with the operation and stabilize the owner at home. So how to set the smart lock administrator, we will introduce the following.

Smart Lock Settings Administrator Steps

First enter the door lock function settings. Enter the function setting after placing a finger (entering a password, or relying on a card) for verification. Then the smart lock will remind you, please verify the administrator information, then put fingerprints, and finally verify the success.

智能锁怎么设置管理员

How to add and delete users

Add user

Short press the setup button → Verify the administrator is successful → Put your finger (Enter password, press the card, press the remote key) Voice broadcast: 00X Add success → Please verify the administrator information → Add the number: 00X Please enter your fingerprint or password

delete users

Note: The unlock information deleted can only be ordinary users. If you want to delete the administrator information, you must perform the initialization operation. It should be noted that the continuous input error exceeds 6 times, the keyboard is locked for 1 minute, and the system does not respond to any operation within 1 minute.

Anti-peeping password function

When the password is opened, enter the password “XXX Password XXX” as follows to add some extraneous codes before and after the password, and then press # to confirm it. The password must be included in the input. The operating system will automatically exit after no more than 10 seconds of operation.

The smart lock setting function is still very easy to operate, each smart lock has instructions, easy to understand and easy to operate. The above information about smart lock settings administrator is edited and edited by Zhijia.com. If you still want to learn more about smart locks, just leave a message at the bottom of the article!

related suggestion:

Article: What is the principle of the WeChat smart lock

Recommended: Smart Home Application Smart Home Project

The main function of the Edge Banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.

The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.

PVC Edge Banding For Office

Edge Banding for Office, PVC Edge Banding For Office,PVC Edge Banding Tape For Office

Henan Shunbang Chemical CO.,Ltd , https://www.pvcresinchemical.com