Sanitary ware mainly refers to three types of products: facial cleansers, sinks and toilets. Since most of them are ceramic products, they are generally also called sanitary ceramics. In addition to the single type of washing tank used in the kitchen, the other two types of products have many different styles, structures and functions.
Identify ware
The knowledge of the toilet is much more. There are toilets (split and conjoined), squatting toilets (water-sealing and straight-line), and urinals (vertical and wall-mounted). The toilets are divided into working styles. Type and siphon type, while siphon type is subdivided into falling siphon type, jet siphon type and vortex siphon type.
Washers are divided into wall-mounted washbasins, vertical washbasins and tabletop washbasins, and desktop washbasins are divided into two types, namely, counter basins and under counter basins.
The way in which the toilet flushes affects the cleanliness of the wash, the size of the noise, and the amount of water used. Therefore, special attention should be paid to the selection of the appearance quality and style.
Select ware
The selection of ceramic sanitary ware should have different requirements for the visible surface and the non-visible surface: The visible surface refers to the surface that is easy to see after the porcelain is installed, and the quality of the visible surface should be strictly controlled, especially when the water is splashed when used. The quality of the parts is more important, and the quality of the invisible surfaces after installation should not be too picky.
Appearance quality judgment standard
1. Glazed quality. The glaze must be smooth and smooth, with uniform glaze. Visible surface, especially the quality of glazed water splashing is especially important. Drop a few drops of colored liquid on the glaze with a cloth to wipe it evenly. After a few seconds, use a damp cloth to dry it. Check the glaze and no dirty spots are better.
2. The size of the deformation. Put the porcelain pieces on a flat platform, check whether the movement is smooth and even in all directions, whether the mounting surface and the edge of the porcelain surface are flat and whether the mounting holes are even and smooth.
3. Is there cracking? Tap on the edge of the porcelain piece with a thin rod to hear its sound crisp, and when there is a "husky" sound, it proves that there is a crack in the porcelain piece.
4. Porcelain pieces also have water absorption, toilets have drainage, water consumption, noise, water seal function and other performance requirements. These performance consumers are generally difficult to check and judge. They should try to purchase products with quality credit guarantees, and check the recent effective quality inspection reports covered by the CMA chapter that have been certified by the relevant national authorities.
Precautions
1. Before purchasing the toilet, make sure to measure the distance from the center of the outlet to the wall surface (down drainage method) or the distance from the floor surface (post-drainage method) to determine whether the selected toilet is a drain or rear drainage structure. Use a toilet with the same drainage method and suitable installation dimensions to install. The wall spacing of the toilet drain outlet should be equal to or slightly smaller than the wall distance of the toilet outlet (down drainage method); the distance from the toilet drainage outlet to the ground should be equal to or slightly higher than the height of the toilet drainage outlet (after drainage).
2. Matching product style tone must match. The number of ceramic pieces in the bathroom is more than one, and the number of ceramic products such as toilet bowls, wash basins, soap boxes, hand paper boxes, and mop pools can only be consistent or close to harmony and beauty.
3. Choose the sanitary ware to pay attention to the best time. After the overall decoration style of the new house is set, it is time to order the appropriate brand, style and color of the sanitary ware, and then the corresponding installation conditions can be created during construction according to the requirements of the ware set.
Style effect picture Bay window decoration new style decoration decoration style bathroom door size bathroom size bathroom door
Concealed Shower Faucet - Hidden Shower Faucet, the main body is installed into the wall, saving space in your bathroom.
Concealed installation Brass Shower Bracket Holder and Solid Brass Shower Mixer Valve(Contain Trim and rough-in valve).
1. Shower faucet with single handle, you can change the outlet by the diverter in the faucet spout.
2. Cold and hot dual control device, two feeling choice, easy control.
3. Polishing chrome plated, multiple outlet water.
Concealed Shower Faucet
Concealed Shower Faucet, Shower Faucet Kit, Wall Mounted Shower Faucet, Rainfall Shower Faucet, Shower System
Kaiping Oubao Sanitary Ware Hardware Co., Ltd. , http://www.oubaofaucet.com