Overhead supervision points

1, see the construction staff

(I) Clothing

Clothes: There should be special work clothes, buckle buttons, so that clothes, personal, lightweight, can not pass through loose and elegant clothes.

Shoes: Do not wear flip-flops or barefoot work. If you are in the air, you must use soft-soled shoes.


(b) Physical and mental status

The physical conditions of workers at high altitudes must meet the safety requirements. For example, people with high blood pressure, heart disease, anemia, epilepsy, and other uncomfortable tasks are not allowed to work in high places. People with excessive fatigue, lack of energy, and low morale need to stop working at heights; Work at heights.

2, see security equipment

(a) Hard hat

● The helmet cap, cap liner, and cap strap are complete and effective.

● The helmet should be worn tightly and worn. The cap should be tied under the jaw and fastened.

● If necessary, check the validity of the helmet and the certificate.

● The helmet is used for other purposes.

(B) seat belts

Safety belts should be worn when working in the following conditions:

(1) It is possible to work at heights. When entering the workplace, one must wear a seat belt;

(2) At heights exceeding 2 meters in height;

(3) When sloping roof work;

(4) Flat-top houses, when there are no fences within 1.2m from the edge of the roof or opening of the roof;

(5) any suspended platform or bench;

(6) any guardrails, incomplete scaffolding;

(7) Close to a ladder near a roof or floor opening;

(8) When there is no reliable anti-fall action at high altitude operations.

Correct use of seat belts:

(1) To tighten the belt, the buckle assembly must be fastened;

(2) When using a seat belt for suspending work, do not hook the hook directly on the belt, and hook it on the hanging ring of the belt;

(3) It is forbidden to hang the seat belt on a member that is not firm or has a sharp corner;

(4) The use of the same type of safety belt, the parts can not be replaced without authorization;

(5) Seat belts that have been severely impacted cannot be used even if their appearance has not changed;

(6) It is forbidden to use the safety belt to transfer heavy objects;

(7) Seat belts should be hung on the top of a firm and reliable place, not less than the waist height.

3, see the construction operation

Mainly check whether the construction staff has "three violations" during the construction process

4, check the construction materials

Whether the construction materials are randomly stacked or not;

Whether the construction waste has been cleaned up in time;

There is no dangerous material below the work-at-height.


5. Safe use of ladders

6, safe use of scaffolding facilities


7, the correct use of the operating platform

This website solemnly declares: This article is the reprint of the online media, only represents the author's point of view, has nothing to do with this site. If news articles and comments infringe your legal rights, please call us and we will handle it in a timely manner.


Silicon Briquette

Silicon Briquette,Silicon Slag Briquette,Silicon Carbide Briquette,Silicon Alloy Briquettes

YINCHUAN BINHE ABRASIVES CO.,LTD. , https://www.nxbhzhang.com