In the renovation of old houses, it is time-consuming and labor-intensive to remove the tiles and mosaics on the old walls and floors. For some older houses, the structure of the walls may even be destroyed.
Nowadays, the fast-renovation products on the market, including tile surface treatment agent and ceramic tile and mosaic adhesive, are widely used in the European market. They can directly paste new tiles and mosaics without removing the old tile base layer; The surface treatment agent of the tile is applied to the base layer, and the paint can be directly painted after the putty is scraped. This rapid refurbishment method will not damage the old building's grassroots floor, reduce the renovation cost and shorten the construction period, and avoid the problem of garbage and noise in the old house renovation.
Old tile wall for "new clothes"
Case: Liu Ayi's kitchen and bathroom tiles have been difficult to remove after many years of use. The hollowing and cracking are also very serious. Recently, she wanted to partially renovate the kitchen and floor tiles. However, considering the removal of old tiles, garbage will be generated, and the noise of bricks and walls will affect neighbors. Aunt Liu wants to keep the original tiles and put new tiles directly on them.
Weapons: The kitchen and bathroom walls can be directly tiled with new tiles on the old tiles.
First, remove the dust and dirt on the surface of the old tile, and then use the tile adhesive to make the base layer on the old tile. After the batch is finished, you can directly paste the new tile. Liu Weihong, product manager of Saint-Gobain Weber Building Materials, suggested that the adhesive should be thinly applied on the back of the new tile. The thickness should be covered by the back of the tile to make the new tile stick more firmly.
When laying new tiles, use a rubber hammer to tap the new tiles and adjust the edges. You need to pay attention to reserve expansion joints. After 24 hours, wait for the tile adhesive to dry out and use the joint agent to sew. With the right tools, consumers can DIY themselves.
Tip: Individually serious drums or damaged tiles need to be removed. After eradication, they are repaired with mosaic tile surface treatment agent. After flattening with the old tile surface, the tile is glued to the new tile to make it stronger.
Old tile wall turned paint wall
Not only the tile adhesive is applied to the old tiles, but also the adhesive on the back of the new tiles.
Case: The owner Xiaole wants to renovate the old house of Xinyuan Community. This old house, which is prepared as a wedding room, has been lived by the parents. The tile maintenance is good, just clean the oil. But in order to match the overall style of the home, Xiaole wants to brush a wall of green imitation paint on the kitchen wall. So she hopes not to remove the old tiles and mosaics, but can quickly renovate the walls with paint.
Tips: Apply paint on old tiles or mosaics, and have higher requirements on the flatness of the wall and the putty layer.
First, the surface treatment agent of the mosaic tile should be stirred with water and evenly applied to the base layer of the old tile twice. The reporter saw that this mosaic tile surface treatment agent looks similar to traditional cement mortar, but it is actually made of cement or other inorganic cementitious materials added with high molecular polymer, which is applied to the old tile or mosaic surface. New tile paving or paint construction is possible.
In the implementation, the old wall surface needs to be inspected, repaired and cleaned. The surface treatment agent of the mosaic tile is used to be evenly applied twice. After 48 hours of treatment, the flexible water-resistant putty is applied on the dry treatment agent. After the putty is processed, the paint can be applied.
Tip: The use of flexible water-resistant putty avoids the cracking, emptying and falling off of the wall paint.
â– Guide to use
Price: The common mosaic tile surface treatment agent on the market is 25kg/bag, tile adhesive 40kg/bag, and the folding cost is about 40-50 yuan per square meter. The cost is slightly higher than the general cement mortar. Refurbished in a small area. However, labor costs and garbage disposal fees for removing old bricks can be eliminated, and the overall expenditure is not increased much.
Labor: General old tile wall stickers are new to the local decoration. Some decoration companies such as Tiansheng and Qisheng Yao can carry out this business. The labor cost is about 25-30 yuan per square meter.
Thin brick: Although the rapid refurbishing method is applicable to the old mosaic and tile wall of various types of veneers, the newly laid tiles are preferably made of thin tiles currently on the market, with a thickness of about 5-6mm, which is more helpful. For space saving, there are no special requirements for mosaic or paint finishes.
Old paint wall: For new painted walls, it is also possible to tile with ceramic tile adhesives; but for old painted walls, it is necessary to remove the topcoat and putty layer to expose the cement mortar layer before using mosaic tiles. The surface treatment agent treats the wall surface and then tiles with a tile adhesive.
Lockout hasps are a valuable and convenient way to lockout an energy source ensuring that your worker's safety is never compromised.The
Lockout Hasp is placed through the isolating point and each person carrying
out maintenance or service work attaches and locks in place their own unique
individually keyed padlock through the lockout hasp.This nonconductive, Nylon Lockout Hasp is designed to offer exceptional electrical insulating characteristics. Apply to electric power isolation and lock, high requirement of corrosive or explosion-proof places.Allow multiple padlocks to be used when isolating one energy source.
Nylon Lockout Hasp
Safety Nylon Lockout Hasp,Nylon Lockout Hasps,Nylon Lock Out Tag Out Hasp,Nylon Loto Hasp
Lockey Safety Products Co., Ltd. , http://www.lotolockey.com