Four main points to pick out high quality steel doors

Steel-wood doors have been favored and favored by more and more consumers because of their high quality and low price. But how to choose high-quality and desirable products in the dazzling steel-wood doors? First, the steel-wood suits are defined as follows: the outer part of the door leaf is shaped by Steel Plate. The interior is a wooden keel, the door cover is made of multi-layer board, and the door line is made of plastic steel or wood plastic, so that the product has the advantages of no deformation, no cracking, no pollution, long service life and the like. However, the steel doors and doors on the market are now uneven. Some manufacturers' products are used to deceive consumers and disrupt the order of the steel door market. Therefore, when choosing this type of product, you should pay attention to the following points:

Door leaf surface treatment process

The surface treatment processes on the market are mainly divided into two categories: 1. Filming process: PVC material with imitation wood grain on the surface of the steel plate (ie, plastic molding), the production process is that the PVC material is heat-bonded to the steel plate, and such products are used. In the process, due to changes in heat and cold, degumming, delamination, leg color, etc. may occur, and the phenomenon of degumming and rusting after sharp scratching of the surface is serious.

2, transfer paint process: steel plate anti-corrosion treatment by phosphating solution → steel plate bottom surface spray treatment → baking → transfer wood grain heating to the bottom of the steel plate paint → baking → surface using automotive paint process. The performance is relatively stable.

The door cover materials on the market are mainly divided into four categories:

1. Multi-layer veneer door cover: multi-layer board film (PVC) or sticker paint, etc. Due to the surface bonding process, the veneer and the plate are easy to fall off, delaminate, and surface layer appear in a humid and dry environment. Foaming, uneven. Long-term use of anaerobic bacteria between the veneer and the plate will cause deformation of the material, affecting the use and aesthetics.

2. MDF door cover: It is mainly made of MDF surface sticker for painting or PVC film. Because MDF is made of straw fiber and glue, it is formed by high pressure, so it will expand, mold and deform after water absorption. Its density is greatly reduced, which affects the nailing force and service life.

3, steel door cover: the production process of steel door frame is adopted, the door cover and the door leaf have no color difference, the steel plate is shaped, and the surface adopts transfer paint process. Most of these door covers are single-sided lines and have a single line. The installation method is the same as that of the steel door, which makes it lose the essence of the interior door of the steel-wood set.

4, multi-layer board UV paint veneer cover: is a new type of door cover, multi-layer board using transfer wood grain, surface UV paint finish technology, product color is full, gorgeous, because of the use of UV paint finish It achieves the best condition of use and has the characteristics of no deformation, no cracking, moisture, heat, abrasion and pollution.

The lines on the market are mainly divided into three categories:

1. Wood-plastic line: wood-plastic substrate surface film (PVC) or sticker paint. Due to the bonding process on the surface, the veneer and the substrate are easy to fall off during use, and the surface layer is foaming and wood-plastic. The substrate is easily powdered and the like.

2, plastic steel line: plastic steel substrate surface film (PVC), due to its surface using a bonding process, in the process of use between the veneer and the substrate easy to fall off, the surface layer foaming.

3, plastic steel paint line: on the surface of high-quality plastic steel substrate using transfer wood grain and UV paint finish technology, product color is full, gorgeous, so that the product reaches the best state.

Steel plate thickness

The thickness of the steel plate is the part that best reflects the quality of the product. Due to the diversification of market prices, the thickness of the steel plate is also different. If the surface of the product is flat, smooth and stable, the thickness of the steel plate should be 0.5mm and 0.5mm or more. Collision and impact resistance can achieve good results. The inferior products of some enterprises use 0.3mm or thinner steel plates, resulting in poor surface flatness and insufficient steel rigidity of the door. Such products have seriously disrupted the normal competition order of the steel-wood door industry, damaged the interests of consumers, and brought more quality complaints and after-sales problems to the dealers of steel-wood doors. It is recommended that the market resolutely resist such inferior products.

The hydraulic pressure Jumper Connector hardware is a kind of conductor jumper wire connector between two tube busbars in power transmission facility. The clamp body is aluminium,the other parts are hot-dip galvanized steel.

The Splicing Fitting is primarily used to join kinds of bare conductors and lightning conductors. It bears the same electirc load as conductors. Most splicing fitting bear all the tension of conductors, ground wires and lightning conductors. According to the tensile condition, splicing fittings include force-bearing type and non-force-bearing type. Splicing fittings are generally divided into compression type and preformed type. And the compression type includes hydraulic compression, explosive compression and compression with pliers.

Jumper Connector

Jumper Connector

If you have any questions, please contact with us directly.
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.





Jumper Connector

Jumper Connector,Compression Jumper Connector,Hydraulic Compression Jumper Connector,Jyt Jumper Connector

Shandong Vantage International Trade Co., Ltd. , http://www.sdvantage.com