The main varieties of ceramic sanitary ware are toilets, bidets, facial washers, sinks, mop pools, hand carton boxes, soap boxes, etc. Currently, there are many brands of ceramic sanitary ware on the market, and there are large differences in quality grades, and there is a wide range of price differences. When purchasing, you should first have a sense of support, first determine the standards you expect to reach, and each component or accessory in the kit should be at the same level.
Determine the toilet drainage method and installation size
Before purchasing the toilet, be sure to measure the distance from the center of the outlet to the wall surface (down drainage method) or the distance from the floor surface (post-drainage method) to determine whether the selected toilet is a drainage or rear drainage structure. The method is consistent and the size of the toilet is suitable for installation. The wall spacing of the toilet drain outlet should be equal to or slightly smaller than the wall distance of the toilet outlet (down drainage method); the distance from the toilet drainage outlet to the ground should be equal to or slightly higher than the height of the toilet drainage outlet (after drainage).
Three judgments of appearance quality
Deformation size: Place the porcelain pieces on a flat platform, check whether the movement is smooth and even in all directions, whether the mounting surface and the edge of the porcelain surface are flat, and whether the mounting holes are even and smooth.
Whether there is cracking: tapping the edge of the porcelain piece with a thin rod to listen to the sound is crisp, when there is "scratching" sound proof porcelain pieces crack.
Glazed quality: The glaze must be smooth and smooth, with a uniform glaze. Visible surface, especially the quality of glazed water splashing is especially important. Drop a few drops of colored liquid on the glaze with a cloth to wipe it evenly. After a few seconds, use a damp cloth to dry it. Check the glaze and no dirty spots are better.
Porcelain pieces also have water absorption, toilets have drainage, water consumption, noise, water seal function and other performance requirements, these performance consumers are generally difficult to check and judge, should try to buy products with quality credit guarantee, check the product The recent effective quality inspection reports covered by the CMA chapter have been certified by the relevant national authorities.
Matching product style tone must match
The number of ceramic pieces in the bathroom is more than one, and the number of ceramic products such as toilet bowls, wash basins, soap boxes, hand paper boxes, and mop pools can only be consistent or close to harmony and beauty.
Careful selection of visible surfaces When selecting ceramic sanitary ware, you should have different requirements for visible and non-visible surfaces: Visible surface refers to the surface that is easy to see after installation of porcelain pieces, and the quality of visible surface should be strictly controlled, especially when used. The quality of the splashable part is more important, and the quality of the invisible surface after installation should not be too picky.
Bay window decoration entrance decoration home decoration home style decoration decoration style bathroom door size bathroom size bathroom door decoration home
Kaysen Steel is a manufacturer and supplier of sanitary tank bottom valve, which is used extensively in the tanks and vessels for pharmaceutical, biological, and food industries. This series includes tank bottom diaphragm valves, tank bottom seat valves, elbow-type tank bottom valves, etc , the shape is like a [Y". 2″ and 2-1/2″ y-types tank bottom seat valve is our commonly size, the material could be SS304 or SS316L stainless steel.
Strength:
Material of stainless steel 304,316L or en.1.4301, 1.4404 is from reputed mill to guarantee the chemical composition and mechanical propertis. Material certificate will be submitted to orders.
Forged /investment casting valve body and disc to control the leakage and visual well.
Superior facilities and good experiences for fabrication.
Fast delivery time is possible to meet your needs well in time.
Low cost from bulk production will reduce your budget and improve your business.
Small quantity available.
Quality & Inspection:
PMI test to verify material grade
Dimension controlling during fabricating and finished
Visual and surface 100% examination before shipment
Packed in carton box firstly, then in wooden case
Third party inspection available.
Sanitary Tank Bottom Valves,Food Grade Tank Bottom Valves,Hygienic Tank Bottom Valves
Kaysen Steel Industry Co., Ltd. , http://www.chinasanitaryvalve.com