According to the use location of Daozha, its gates can be divided into straight bars, 90-degree curved bars, 180-degree folding bars and fences.
Abnormal ringing in the chassis
Detection Cause: Check the links section of the bearing and activity is abnormal Remedy: lubricate the bearings or replace <br> <br> Barrier common faults and repair methods are mainly the following:
Steps/methods
When the local coil is unable to be firmly fixed in the nest, the vibration of the car over the road surface will cause the coil in the nest to deform and change the initial inductance of the ground. At this time, the sensor must be reset before it can work normally. . The solution is to put the molten asphalt in place and fix it.
The looseness of the loose screws of the barriers: the hinge screws are connected by positive and negative threads, and the upper and lower two bearings are connected by a double-headed screw. If the screws are loose, the upper and lower positions will be inaccurate. Use a 80mm long Ф4 iron rod to insert the double-headed screw to adjust the brake lever up and down in place.
If the screw is loose, the brake lever will cause the upper and lower positions of the brake lever to be inaccurate and the swing of the lever will be large. When the bolt is suspended tightly, the nut can be locked tightly.
In-position control magnets move position: Cimin Hall elements are used up and down to position. If rectangular magnets and reducer with cams change the position of the wafer, the position is inaccurate. Adjust it accurately and not flip it to solve the problem.
Power off protection switch power off: When the control part of the barrier is out of order, the automatic protection device of the barrier gate will automatically work. At this moment, the brake rod stops at the oblique position, the total power is off, and the machine does not work. At this point, the machine door is opened, and the large belt can be restored by rotating the large belt 3-8 times clockwise. If it cannot be restored to this condition many times, check whether the Hall element and the circuit board have malfunctioned.
The pull-down hook adjusts the looseness of the nut: the lower part of the chassis is provided with a pull-down hook of thread M10, and its function is to pull the spring of the balance mechanism and the zero adjustment of the balance function. It is equipped with two M10 hexagon nuts and ten spring washers. If the nut is loose, knocking noise and balance will occur when the machine is running. Even if the machine can run after the imbalance, it will greatly increase the speed reducer, motor and other transmissions. The load of the components affects the reliability and mechanical life of the operation of the barrier.
PRODUCT APPLICATION:It is mainly used as binder and curing agent in the production of Hi-Temp Refractory Materials for kiln, spray paint, Fire clay, casting and foundry industry. It is a type of colorless and odorless but extremely sticky liquid, freely soluble in water and solidifiable at normal room temperature.
STANDARD PACKAGING: 25kg/bag or 30kg/Drum.
TRANSPORT AND STORAGE
Protect against weathering. Store in a cool and dry environments and prevented from insolation. avoid extreme fluctuations in temperature. Special conditions for opened packaging: Close bags after use to prevent the absorption of moisture and contamination.
SAFETY
The product is not classified as dangerous under the relevant EC directives and corresponding national regulations valid in the individual EU member states. It is not dangerous according to transport regulations. In countries outside the EU, compliance with the respective national legislation concerning the classification, packaging, labeling and transport of dangerous substances must be ensured.The information contained in the safety data sheet should be observed.This contains information on handing, product safety and ecology.
Aluminum Dihydrogen Phosphate Series
Refractory Materials Binder, Hydrogen Heating Raw Material, Dihydrogen Phosphate
shijiazhuang city xinsheng chemical co.,ltd , https://www.xsphos.com