Washing the basin, the bathroom of every household has its place, its existence makes people's daily life convenient. They all say that "doing their own hands and clothing", although now to the market to buy wash basins generally have to help install after-sales service, but the hands-on ability is not bad, parents may wish to try their own knife. Then how should the basin be installed? The following is a small series and we will talk about the installation methods and precautions of several large wash basins.
Washing table installation notes:
1, pay attention to the height of the washstand
When manufacturing the installation of the washstand, you should pay attention to its height. Generally, the height of the countertop from the ground is about 75-90cm, and the height can be selected according to personal habits.
2, pay attention to the cooperation between the wash basin and the faucet
Many times there will be a tap and the water will splash out. This is because the wash basin and the faucet are not suitable. The deeper wash basin can be matched with the faucet with a stronger intensity, while the shallower wash basin is not suitable for the strong wash. Pot, so there is water splashing out.
3. Space decision form
The washbasin is roughly divided into two types: independent and desktop. The independent styling is beautiful, the occupied space is small, and the suitable space is small. The space is larger, the desktop is also good, the function is complete, and it is convenient to use.
How to install a vanity:
First, the basin material classification
According to the material, the basin can be divided into ceramic basin, glass basin, stainless steel basin, artificial stone basin and so on. Among them, ceramic basins are the most common and the price is average. Glass material basin cleaning is difficult; stainless steel material is easy to clean, but suitable for single style; artificial stone basin is more expensive.
Second, the basin installation needs to know
Basin installation is a very critical step. Because different manufacturers choose different basin products, the installation methods are different. The following small series will tell you about the installation of several common basins.
1. Installation method of above counter basin
The installation of the above counter basin is relatively simple. Just open the hole at the predetermined position on the countertop according to the installation drawing, then place the basin in the hole and fill the gap with glass glue.
2. Installation method of under counter basin
The installation of the under counter basin is more complicated than the installation of the above counter basin. Firstly, the mounting bracket should be customized according to the size of the under counter basin, and then the under counter basin should be installed at the predetermined position. After the bracket is fixed, the countertop with the opened hole is placed under the counter. On the basin. When installing, be careful that the position of the bracket is fixed accurately. In addition, the hole should be rounded.
3, hanging pot installation method
Hanging basins are generally mounted on the wall, which saves space. Let's take a look at the general installation method of the hanging pot.
(1) By measuring, the installation height and center line are marked on the finished wall. The recommended installation height is 82cm.
(2) Place the basin along the center line to the installation position, adjust it to center horizontally, and anchor the mounting hole position on the wall.
(3) Carefully open the basin, and drill the bolt holes of the appropriate distance in the anchor holes of the wall, install the suspension bolts on the wall, and keep each bolt exposed to about 45MM.
(4) Level the basin, put on the gasket and tighten the nut until appropriate, and cover the decorative cap.
(5) Place the bracket against the wall, correct its position and then anchor the hole. Install the bracket on the wall and connect the basin to the bracket with four pieces of rubber.
(6) Install the faucet and drain assembly according to the instructions for the purchased water, and connect the water inlet and drain.
(7) Put a mildew-proof seal between the basin and the wall.
4, the column basin installation method
The general method of installation of the pedestal is to first install the water purifier of the pedestal, then install the faucet and hose. Then place the pedestal porcelain column in the corresponding position, carefully put the pedestal basin on it, and notice that the lower water pipe is just inserted into the lower water pipe left by the original ground. Then connect the upper water pipe to the water inlet. Finally, glue the glass glue along the edge of the basin.
Concerned about surprises
Label: Washing basin installation method large inventory
Previous: I have to understand the door and window decoration precautions Next: Wood floor purchase to avoid three traps
White Wooden is classical marble quarried in China, white background with wood vein which is very hot welcome and favored around world,this kind of wooden white marble texture show us a clean,pure and fresh idea. This wood vein marble is very suitable for wall and floor tiles, inside or outside.
Wooden White Marble products series:
1: slab, thickness 1.6/1.8/2/3cm
2.tiles,normal 61*30.5cm/30.5*30.5cm,thickness normally 10mm,custom size is welcome.
Surface: polished, honed,
Supply Ability: 5000 square meters per month.
Uniqueness: strict Processing standard, size tolerance standard, crystal lines standard, 100% Inspection before shipping,very stable on supply.
White Marble
White Marble,White Marble Texture,White Marble Flooring,White Marble Stone
Fuzhou HuaRen International Imp&Exp.Co,Ltd , https://www.huarenstone.com