[Chinese aluminum industry network] (reflection glass curtain wall) refers to a building's external protective structure or decoration that is composed of a supporting structure system and glass, which can have a certain displacement capacity relative to the main structure, and does not share the role of the main structure. structure. There are two kinds of single and double glass walls. The glass curtain wall is a beautiful and novel building wall decoration method, which is a distinctive feature of the modern high-rise era. With the continuous advancement of technology, semi-hidden glass curtain walls are available. Let's take a look at the installation method of half-curtain glass curtain walls. The method of installation and installation of horizontal and hidden glass curtain walls is a structural glass assembly method using an aluminum alloy glass mosaic slot. The method is to bond the glass to the glass frame with mounting grooves on the upper and lower sides. The upper frame of the glass frame is supported on the cross beam of the aluminum alloy framing system, and the lower frame is fixed on the lower cross beam by the fixing piece, and the vertical edge is used. The pressure plate is fixed on the lower beam, and the vertical edge is fixed with a pressure plate in the glass insert of the vertical bar to form the whole piece of glass from the top to the bottom. The plate is divided into a long strip by the vertical bar plate. It is not possible to stick plastic on site and not allow plastic injection on site. The second method of installation is to add a pressure plate to the horizontal or vertical edge of the full hidden glass curtain wall to form a semi-hidden frame curtain wall with horizontal or vertical edges. In other words, the full hidden glass curtain wall made a half hidden frame effect. This platen is not only a horizontal or vertical molding, but also has a second fixation to the glass, which enhances the sense of security. At the same time, it can also change the shape and color of the platen to increase the color of the plate. The glass is pasted on the glass frame with grooves installed on both vertical sides, and the vertical edges of the glass frame are fixed on the vertical bars of the aluminum alloy grid system by the fixing pieces; and the glass frames are fixed on the upper and lower sides of the aluminum alloy frame grid grooves. The beam is embedded in the groove. The bonding of the vertical edges of the glass and the glass frame is performed in a special workshop in the factory, and the surface of the material is clean and the bonding quality is good. The glass frame is transported to the site after the structural adhesive is completely cured, and the bonding quality is guaranteed. The second method of installation is to fix the coated glass first in the inlaid groove of the aluminum alloy profile at the top and bottom, forming a glue slot on the surface of the glass and the vertical bar, and then filling the structural glue with the glue slot at the site to form a vertical The structure of the plastic glass assembly system. This production method is due to the plastic injection on the spot, the surface of the material is clean and dry, the degree of environmental cleanliness during plastic injection is difficult to be fully ensured, and often the wind load is required before the structural glue is not cured, and the adhesive strength is affected. It is generally limited to buildings that do not have installation clearances between the building and the aluminum alloy frame system and should not be used unless absolutely necessary.