Abstract Resource conservation, environmental friendliness and sustainable benefits are the trending requirements of the stone machinery industry. Traditional stone processing produces a large amount of sewage and cutting stone powder during the processing, causing inevitable pollution to the surrounding environment, seriously affecting people's normal life and...
Resource conservation, environmental friendliness and sustainable benefits are the trending requirements of the stone machinery industry. Traditional stone processing produces a large amount of sewage and cutting stone powder in the processing process, causing inevitable pollution to the surrounding environment, seriously affecting people's normal life and physical health. It has been proposed to shut down all stone processing and pollution enterprises. However, experts have suggested that stone machinery, as part of the national production activities, simply shuts down, which is tantamount to ruining food and not benefiting from economic development. Instead of shutting down, it is better to use technological innovation and turn to cleaner production, which is the only way to solve the problem. "revolutionary" innovation
As one of the Chinese stone processing machinery manufacturers and suppliers, Huaxing Company has gradually realized the industrial chain from the cutting of stone blocks, to the deep processing of plate production, to the final wastewater treatment and waste utilization through continuous exploration and technological innovation. Efficient development can not only solve the environmental problems of the upstream stone industry, but also promote the rapid transformation and upgrading of the stone industry.
Through technological innovation, Huaxing Stone Machinery Co., Ltd. has developed a new type of dual-arm double-drive hydraulic combination saw, which is the first to achieve clear water cutting for upstream stone processing. The product innovatively proposes a new cutting process, in the width direction of the stone, to achieve one-time cutting, the saw blade is the same diameter saw blade, the maximum number of installation is 40, eliminating the need to use the size of the combined saw blade The film processing time is obviously improved. The key point is that in the cutting process, it is only necessary to use clean water as the cooling liquid instead of the original chemical raw materials, which not only reduces the production cost, but also avoids environmental pollution. Zhou Keji, president of the Shandong Stone Association, commented that “the successful development of the Huaxing dual-arm dual-drive combination sawing machine is a revolution in the history of diamond disc processing.†Its promotion and application will definitely promote the transformation and upgrading of the entire stone industry. .
Chain work
With high-end cutting equipment, how to carry out efficient deep processing of the cut sheet is a big problem for the processor. In addition to environmental pressure, it is a big problem to purchase all kinds of processing equipment. Cutting, to the thickness, to the grinding and polishing, and then to the specification cutting... The final standard is off the shelf, which is a complicated process, with a lot of people, low efficiency and high cost. If you can achieve chain production of the entire process, the whole machine operation, it will become more trouble-free.
Huaxing Stone Machinery Co., Ltd. is market-oriented and customer-oriented, and has created and successfully launched a marble and granite narrow plate production line to realize the automatic operation of the processing. The entire line requires only five workers to operate, and labor costs are greatly reduced. In addition to the continuous mill and the clean air cleaning machine, the rest of the equipment can be recycled water, saving more water.
Clean production
Environmental issues are a matter related to people's livelihood. Therefore, all valuable production must be based on resource conservation, environmental friendliness and sustainable benefits. This is also the trend requirement for the development of stone machinery industry. Wastewater waste and corner scraps generated during the processing of stone materials are a headache for many stone processing enterprises. As a practitioner of “green developmentâ€, Huaxing, while providing high-end sophisticated equipment for the stone processing industry, certainly takes into account its pollution control and long-term development issues.
The stone processing wastewater purification separation and recycling system developed by Huaxing Stone Machinery Co., Ltd. is a high-tech water-saving product designed and developed for the stone industry. The system can purify and separate the sewage generated by the stone processing into cake-like stone powder and clean water. The clean water can be recycled to achieve the purpose of saving water resources; the cake-like stone powder can be further processed. The application of this system can completely solve the problem of dust pollution in stone processing enterprises, and is an essential equipment for building environmentally friendly stone processing enterprises. For the utilization of waste residue and scrap, Huaxing proposed a complete solution. The scrap material can be used for sand making or used as a filler for artificial boards after being crushed, and the waste residue is processed into ultrafine stone powder and ultrafine calcium carbonate powder, which becomes a rubber plastic, paper, food, medicine, polymer composite material. , the best raw materials and filling materials for the daily chemical industry.
Main performance characteristics:
The processing flow is: processing the wool board through the stone cutting sawing equipment, transporting it to the material rack in front of the vacuum robot with the transfer equipment, the vacuum robot automatically takes the sheet onto the conveyor and automatically transports it to the cutting machine, in the cutting board On the machine, the untidy plate head is cut off by manual observation, and then automatically conveyed to the thickening machine. The plate is leveled and thickened by the thickness machine, and is automatically transported to the continuous grinding and polishing machine. It is then automatically transferred to a multi-tool cross-cutting machine to cut the sheet to the required size. After the cutting is completed, it is automatically sent to the edging and chamfering unit, the plate is corrected, and then automatically enters the cleaning, air drying, wiping process, and then the package is inspected.
We are one of the leading Manufactures, Suppliers and Exporter of high quality Aluminum Tee in China.
Our Aluminium Tee Fittings in different grades, sizes and thickness, These are designed as per the international quality standards.
All these Aluminum Pipe Fittings Tee can also be made available as per the technical details furnished by the client.
This Aluminum Tee are widely demanded in various industries for connecting various pipes together.
Product Name: Aluminum Tee; Aluminium Tee Fittings;Aluminum Pipe Fittings Tee
Thickness :
3mm-50mm
Outer diameter:
15mm-500mm
Alloy Grade:
1000 series : 1070A,1060,1100,1200
2000 series :2A11,2017,2A12,2024
3000 series :3003 3A21
5000series :5A02,5052,5A03,5A05,5A06,5083,5086,5454
6000 series :6061,6063,6A02,6082,6005
Surface
Mill Finish, Anodized, Powder Coated, Wooden Finish, Polish
Packing
Export standard
Payment Terms
100% irrevocable L/C at sight or 30% T/T in advance as deposit,70% balance before shipment
MOQ
1 Piece
Delivery time
20-45 days after receiving L/C or deposit
Loading Port
Xingang Port,Tianjin
Aluminum Tee
Aluminum Tee,Aluminium Tee Fittings,Aluminum Reducing Tee,1060 Aluminum Tee,Aluminum 6061 Tee,Aluminum 6061 Reducing Tee
HEBEI HANMAC MACHINE CO., LTD. , https://www.chinahanmac.com