1. Heating with heating cable is a green and environmentally friendly heating method that achieves zero emissions and no pollution.
The use of coal-fired boiler heating is the main factor causing air pollution in this area. According to the data of a northern city in China, for every 1 million square meters of heating area, a heating period consumes 58,300 tons of coal, 607 tons of smoke, and emits CO2 and nitrogen. 1,208 tons of oxygen compounds and 8,500 tons of ash, causing the air quality in the region to exceed the third grade in the heating period for more than 100 days, making the annual blue sky project aborted. To completely change the status quo, only changing the energy structure and heating with heating cables should be an indispensable solution.
2. The heating effect is good and the heating rate is high.
As mentioned above, the use of ground radiant heating, whether it is heating effect or heating efficiency, is unmatched by other heating methods.
3. The controllability is extremely strong, realizing the division and division control of the household, and the operation is convenient.
The heating cable low-temperature radiant heating system is simple and easy to operate in manual and automatic programming control, which is conducive to energy saving. The practice data proves that the energy consumption can be reduced by 20%-30% in the heating system through temperature control and household measurement measures. The heating cable low-temperature radiant heating system can be easily implemented in the control of households and sub-chambers, and its energy-saving effect is more obvious in dual-employee families and public buildings.
4. Abandon the construction and investment of pipelines, pipe trenches, radiators, etc., saving land and increasing the use area. According to statistics, it can save land and increase the building use area by about 3 to 5%.
5. No water, no fear of freezing, use it to open, no need to close, more conducive to building intermittent heating energy.
6. Comfortable, warm, does not occupy the wall, is conducive to architectural decoration, decoration.
7. Long service life, low maintenance cost, installation meets the requirements and operation, the system life is the same as the building, and there is no need for maintenance and repair for many years.
8. Conducive to the "shaving peaks and valleys" of urban thermal power systems. In the power supply system based on thermal power, the most headache is the "peaking" problem. Although the use of "pumped storage" can solve the problem of "peaking", but the cost is high and the efficiency is low. To raise the peak price, the problem of "peaking" can be solved. The concrete filling layer of the system with a thickness of about 10 cm is a good thermal storage layer. We can use the electricity in the trough to warm up the heat. This is a thing that has both “peakingâ€, energy saving and increased revenue.
9. Simple installation and low operating costs.
Since the system does not require infrastructure, the equipment required for installation is very simple and the construction is very convenient. You don't have to worry about leaking pipes, you don't need to reserve holes in the floor, you don't need to hang on the wall, so the installation is easy. In buildings with energy-saving facilities, the operation cost of low-valley electricity is not higher than other types of heating costs. In the case of an office or dual-family home, the operating costs are lower when using intermittent heating.
Pe Wax,Waxing,Wax Pen,Wax Museum
PVC resin serie,Lubricating agent series Co., Lt d , http://www.pvcseries.com