1. According to the type of gas used
Natural gas stove, artificial gas stove, liquefied petroleum gas stove electromagnetic cooker;
2. By material
There are cast iron stoves, stainless steel stoves, and enamel stoves;
3. According to the eye of the stove
Single eye, double eye, multiple eye;
4. According to the ignition method
Electric pulse cutting ignition stove, piezoelectric ceramic ignition stove;
5. According to the installation method
Desktop stove structure: The desktop cooker is mainly composed of burner (burner, inner and outer fire cover), valve body (including nozzle, damper plate, conical spring), housing (can be split housing - panel, rear plate and left and right The side plates are assembled, or may be an integral tensile housing), a hob, a knob, a liquid pan, a furnace foot, an intake pipe, and a pulse igniter (for a pulse ignition type cooker);
Embedded stove structure: The embedded stove is mainly composed of embedded burner (burner, inner and outer fire cover, etc.), valve body (including nozzle, damper plate, conical spring, solenoid valve), panel (with tempered glass panel, stainless steel panel and Non-stick oil panel, etc.), hob, knob, liquid tray, furnace foot, bottom shell, intake pipe, connecting pipe, pulse igniter (embedded cooker is generally pulse ignition mode, the current ignition mode of gas cooker is mainly divided For both electronic ignition and pulse ignition, thermocouple (extinguishing safety protection device - refers to the device that automatically cuts off the gas passage after the gas cooker flame is extinguished).
6. Press the air inlet mode
At present, there are three ways of entering the wind, entering the wind and entering the wind.
1. Under the wind, as the name implies, it is to enter the fresh air under the cooker to provide the oxygen needed for full combustion. The advantage is that the fire head is large and the heat load is high, which is in line with the cooking habits of the Chinese family. However, the installation of the embedded lower inlet cooker must pay attention to the addition of a secondary air inlet channel in the lower cabinet. Otherwise, insufficient air will cause insufficient combustion of the gas, produce high concentration of carbon monoxide, waste fuel, and even cause serious ignition and explosion, panel burst, etc. Serious consequences;
2. The stove with the upper air inlet does not need to open the hole in the cabinet. It uses a higher burner to allow air to enter from the burner. However, this kind of cooker is not very effective in practical use, mainly because of its low thermal efficiency and its inability to provide high temperature;
3. The full-intake stove combines the above two modes of air intake, and the effect is relatively best.
Epoxy Sanding Slip Floor Product Features / Epoxy Sanding Slip Floor Edit
Rough surface, non-slip, no sand, good anti-slip function
Epoxy Sanding Slipping Floor
Epoxy sanding slip floor map
Excellent anti-corrosion, anti-mold, acid, alkali, salt corrosion, no toxic side effects
Excellent wear and impact resistance, seamless, dustproof and waterproof, easy to clean
Excellent adhesion, rich color, standard color and customer color
Epoxy Sanding Anti-Slip Floor construction technology / epoxy sanding slip floor
Original ground treatment: comprehensively grind, repair and dust the ground
Undercoat: The primer material is coated with a roller or a trowel.
Medium coating: After the primer is cured, the middle layer material is scraped and coated with a trowel after grinding and dust removal.
Sanding: Mix sand with no accumulated sand
Top coat: roll the top coat onto the middle coat
Epoxy Sanding Slipping Floor
Anti Slip Flooring,Epoxy Sanding Wear Resistant Anti Slip Floor,Epoxy Sanding Anti-Slip Flooring,Epoxy Sanding Slipping Floor
Jiangmen Kasole Building Materials Co., LTD. , http://www.kasole-paint.com