1, a method using particle machine: start machine, the mixture was poured into the hopper, the rocking action of the rotating drum, is formed by a wire mesh particles, fall into the receptacle, as the sub-block pulverization, should be added gradually, not filled, In order to avoid the pressure from being too large, the screen is vulnerable.
2 , Note: If the powder does not stagnate in the powder bucket, do not shovel by hand, so as not to cause injury, use bamboo shovel or parking work.
3 , speed selection: Due to the different nature of the raw materials used, the choice of speed, generally can be selected according to the viscosity of the material and the degree of dry and wet. The dry product is faster, the wet product should be slower, but the scope cannot be uniformly defined, and should be determined by the user according to the actual operation.
**Revised and Expanded Version (in English):**
1. **Method Using a Particle Machine:** Begin by turning on the machine. Then, carefully pour the mixture into the hopper. As the rotating drum moves back and forth, the particles are sifted through a wire mesh and fall into the collection container. During the process of sub-pulverization, it's important to add the material gradually rather than filling the hopper completely. This helps prevent excessive pressure, which could damage the screen or reduce the efficiency of the machine. 2. **Safety Note:** If the powder inside the container doesn't clump or stick, avoid using your hands to scoop it out. Doing so could lead to injuries. Instead, always use a wooden or plastic shovel to handle the material safely. It's also recommended to perform the task in a well-ventilated area to minimize dust exposure. 3. **Speed Selection:** The appropriate speed setting depends on the type of material being processed. For example, drier materials may require a higher speed for better performance, while wetter or more viscous substances might need a slower speed to avoid clogging or over-processing. However, there's no one-size-fits-all approach. Users should adjust the speed based on their specific needs and observe how the machine performs during operation. Always start with a lower speed and gradually increase if needed. Additionally, regular maintenance of the particle machine is essential to ensure long-term performance. Check the screens and moving parts regularly for wear and tear, and clean them thoroughly after each use to prevent buildup. Following these guidelines not only improves the quality of the final product but also enhances safety and prolongs the life of the equipment.
Actuator Accessories,Metal Support Brackets,Valves Stainless Steel Bracket,Ball Valve Table Mounting Bracket
ZHEJIANG KINKO FLUID EQUIPMENT CO.,LTD , https://www.kinkoflow.com