1, a method using particle machine: start machine, the mixture was poured into the hopper, the rocking action of the rotating drum, is formed by a wire mesh particles, fall into the receptacle, as the sub-block pulverization, should be added gradually, not filled, In order to avoid the pressure from being too large, the screen is vulnerable.
2 , Note: If the powder does not stagnate in the powder bucket, do not shovel by hand, so as not to cause injury, use bamboo shovel or parking work.
3 , speed selection: Due to the different nature of the raw materials used, the choice of speed, generally can be selected according to the viscosity of the material and the degree of dry and wet. The dry product is faster, the wet product should be slower, but the scope cannot be uniformly defined, and should be determined by the user according to the actual operation.
**Revised and Expanded Version in English:**
1. **Using the Particle Machine:** Start the machine, then carefully pour the mixture into the hopper. As the rotating drum moves with a rocking motion, the particles pass through a wire mesh screen and fall into the collection container. During the process of sub-pulverization, it's important to add the material gradually rather than filling the chamber completely. Overfilling may create excessive pressure, which could damage the screen or cause operational issues. 2. **Safety Note:** If the powder doesn’t get stuck in the powder bin, never use your hands to scoop it out—this can lead to injuries. Instead, always use a bamboo shovel or other appropriate tools for safe handling. 3. **Speed Adjustment:** The ideal speed depends on the type of raw material you're working with. For drier materials, a higher speed is usually more effective, while wetter substances may require a slower setting to ensure proper processing. However, there’s no universal rule for this. It’s best to adjust the speed based on your specific conditions and observe how the machine performs during operation. Additional Tips: Always make sure the machine is properly maintained and inspected before each use. Regular cleaning of the screen and checking for wear and tear will help prolong the life of the equipment. Also, keep the area around the machine clear to prevent accidents. If you're unsure about any step, consult the user manual or contact technical support for guidance. Safety and efficiency go hand in hand when operating particle machines.
Valve Accessories,Underwater Limit Switch,Electro Pneumatic Positioner,Smart Regulation Positioner
ZHEJIANG KINKO FLUID EQUIPMENT CO.,LTD , https://www.kinkoflow.com