1. Begin by removing the basin drain and taking out the mounting hardware and flanges located underneath the water purifier.
2. When installing the basin, make sure to lift the basin top carefully. Remove the flange from the water purifier and securely fasten it to the basin. This step is crucial for a stable and leak-free setup.
3. Once the flange is tightened, place the basin on the countertop and align the drain with the outlet hole on the table. Proper alignment is essential to ensure smooth drainage and prevent any future issues.
4. Apply a raw material belt or sealant at the appropriate location on the water purifier to prevent water leakage. While installing the water in the basin, always ensure that the water purifier is correctly positioned over the basin’s drain.
5. Align the water purifier with the water outlet and place it flat. Be sure to remove the mounting fixture from the water purifier and screw it directly onto the unit. Use a wrench to tighten the water retainer properly for added stability.
6. After the installation is complete, perform a thorough test. Fill the basin with water and check for any signs of dripping or leakage. If everything looks good, your installation is successful and ready for use.
This detailed guide ensures that the installation process is clear, safe, and effective. Following each step carefully will help avoid common mistakes and extend the lifespan of your water purifier and basin. Always double-check all connections and seals before using the system for the first time.Aluminium Copper Air Conditioning Connecting Pipe
AC insulated copper pipe,Insulated Air Conditioner Copper Aluminium Tube/Pipe
Suzhou Green New Material Technology Co., Ltd. , https://www.szgreenvip.com