General process: plastic sheet - cutting - sheet fixing - heating - forming - demoulding - stripping edge - finished product [blister molding requirements for materials]:
1. Blister molding can only produce products with relatively uniform wall thickness (generally chamfered at a slightly thinner point), and can not produce plastic products with widely different wall thicknesses.
2. The wall thickness of the plastic forming is generally in the range of 1 to 2 mm or thinner (the most commonly used thickness of the blister-packed sheet for small packaging is 0.15 to 0.25 mm)
3. The stretchability of plastic molded products is limited. The diameter of plastic molded plastic containers is not more than 1 in diameter and should not exceed 1.5 in extreme cases.
4. The dimensional accuracy of plastic forming is poor, and the relative error is generally more than one percent.
Jiuzhi Plastics Network
Table Saw is a woodworking tool, consisting of a Circular Saw blade, mounted on an arbor, that is driven by an electric motor.
Table Saw
AWLOP CO.,LTD , https://www.awlop.com