1. Determine whether the furniture is really made of solid wood
One of the secrets of judging whether it is solid wood furniture is wood grain and knots. For example, a cabinet door looks like a pattern on the outside, then the position corresponding to this pattern change, see the corresponding pattern on the back of the cabinet door, if it corresponds well, it is a pure solid wood cabinet door. In addition, looking at the knotted scar is also a good way to identify the solid wood: look at the location of the scarred side, and then find the corresponding pattern on the other side.
2. Determine which tree species the furniture is made of
This is a factor that directly affects price and quality. Ordinary solid wood furniture usually uses beech, white oak, ash, elm, catalpa, rubber wood, oak wood, while the precious mahogany furniture mainly uses rosewood, chicken wing wood, rosewood wood. The market for solid wood furniture is relatively chaotic. It is often best to buy brand-name products when it is sub-charged and confuses tree species. At the same time, pay attention to the fact that the price of wood is increasing day by day.
3. Observe the board strength
The board emphasizes that you can press with your fingers to feel the fastness of the board. One side of the material should be fixed with a cross-shaped skeleton. If the skeleton is sparse, the surface will feel unreal and the panel will vibrate greatly; the drawer bottom plate should be pressed by hand to test the strength. Generally, the bottom of the partition board is multi-layered. The partition should be made of five-layer board. Cabinet doors and drawer switches should be flexible. When the panel is covered with thin wood and other materials, the color and luster of the complete set of products should be similar, and the paint film on the surface of the product is not allowed to wrinkle, sticky and leak paint.
4. Observe the advantages and disadvantages of wood
Open the furniture cabinet door and drawer to observe whether the wood is dry and white and the texture is tight and delicate. If there is furniture made of chipboard, density board and primary molding board, open the cabinet door or drawer to see if there is an irritating smell. Observe whether the wood is defective. The main stress-bearing parts of the furniture such as uprights and load-bearing horizontal bars connecting the uprights to the ground should not have large knots or cracks. The structure is firm, the frame must not be loose, and the tenon and material are not allowed to be broken. The parts of the artificial board used on the furniture should be edge-sealed, and the installation of various accessories must be indispensable, missing nails, and through nails.
5. Check stability and safety
Observe whether the drawer or door frame is tilted, whether the position of the tenon is distorted or the eye is too large, the tenon is not strict, and the parts caused by low process level are skewed. Wooden furniture must have safety and stability. When the two cabinet doors are opened 90 degrees, the cabinet body can not be automatically tilted forward by gently pulling forward by hand; the glass of the bookcase door must be edging; dressing mirror and dressing table To install the back panel, the bead should fix the glass surface. Individual parts of furniture (such as legs, drawers, cabinet doors, or brackets, etc.) must support enough. You should nudge the upper corner of the furniture or sit and try to see if the furniture is firm.
Matters needing attention
The furniture should be "handstand". Turn the chair and cushioned furniture upside down to see how they are made. As for the table check from the bottom. See if the seams are reinforced with screws and wedges? Are the slats fastened to the rails? Are there any excess glue and fillers in the seams?
Inspection interface It is advisable to purchase furniture using dovetail joint or butterfly joint. The heavier furniture should be protected with screws at the corners and glued together. As for the position of the back plate, it must also be checked whether it is fitted and screwed. Check the drawer slides and latch drawers should be strong and tighten the screws internally. May wish to pull open the drawer, movable table, cabinet door and other parts to ensure that it can be used freely and connected correctly.
 Â
Check the surface Put your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, check whether the legs and other parts are painted with rough pigments. If the paint at the corners is too thick. If there is cracks or bubbles. (Litian)
Concrete Admixtures is a material refers to the mixing concrete mixing before or during the process of mixing with to improve the performance of concrete .Concrete admixture content is generally not more than 5% of the mass of cement.The quality of concrete admixture products must conform to the national standard "concrete admixture"
Concrete Admixtures
Concrete Admixtures,Polycarboxylate Superplasticizer,Admixtures In Concrete,Waterproof Concrete Additive
NINGBO LUCKY CHEMICAL INDUSTRY CO. LTD , https://www.chinaluckychem.com