Doors and windows are related to the functional requirements of lighting, ventilation, sealing, heat insulation and sound insulation. They are also related to the demand for architectural decoration such as lines and colors, and represent the master's aesthetic and pursuit. Aluminum alloy doors and windows have a good decorative effect and excellent performance, and stand out among many door and window materials, and are widely used in modern homes.
Aluminum alloy doors and windows four advantages
Light weight and high strength The aluminum alloy material adopts hollow thin-wall combined section, light weight and density is only one-third of the steel, and its cross section has high bending strength, and the finished door and window is durable and not easy to be deformed.
Good sealing performance directly affects the use of doors and windows and energy consumption. Generally, the sealing property refers to four aspects of airtightness, watertightness, heat insulation and sound insulation.
The shape is beautiful and the decorative effect is good. Because the surface of the aluminum alloy is anodized, it can present a variety of colors, such as ancient lead steel, copper, gold and silver. The surface of the door and window has an artificial oxide film and is colored to form a composite film layer, which has a particularly high gloss and excellent appearance. The frame of the sash can be made larger, with a larger area of ​​glass, so that the indoor light is sufficient, so that the home is more layered.
Good performance, long service life, aluminum alloy doors and windows are highly resistant to corrosion, and the oxide layer is not easy to fade, does not fall off, does not need to be painted, and is easy to maintain. The door and window control system has a long service life.
Pick the performance selection material at the time of purchase
Look at the performance of this part mainly depends on the heat transfer coefficient, sound insulation performance and watertight air tightness, and this information can ask the merchant to provide relevant test reports when purchasing.
There are two tips for seeing if material testing materials meet national standards. First touch the border, panel and corner of the door with hand. It should be soft and delicate without scratching, and then stand on the side of the door to see if the paint on the door surface has irregularities and the shape of the waves.
The glass that is equipped with accessories and process needs to have the national 3C certification, and the hardware is the key factor affecting the performance of the door and window. Pay attention to flexibility when choosing. Then look at the stitching seams of the doors and windows, glue and the assembly process is good.
Look at the door and window strips. An experiment can identify the quality of the strips. Use a lighter to ignite the strips and then extinguish them. Pinch the burning part by hand. If there is a powdery proof, the strips are good. If there is a sticky feeling, it is an unqualified strip. .
Look at the installation and after-sales to understand the installation of the product and the quality of after-sales service, so as to ensure that the most suitable aluminum alloy doors and windows are purchased without any worries.
Maintenance tips
When sliding the doors and windows, the action should be light. The ash deformation is the main reason for the difficulty in pushing and pulling the aluminum alloy, so it is necessary to keep the door frame and the push-pull groove clean as much as possible. Vacuum cleaner can be used to remove the dust from the inside of the tank and the door seal. It can also be cleaned with a soft cloth or with a neutral detergent. Do not use soap or detergent. After the rainy day, the wet glass and the frame of the door and window should be dried in time, especially the water in the chute. After the chute is used for a long time, the friction is increased, and a little oil can be added, or the surface is coated with a layer of wax oil.
Purity up to 99.999% of aluminum is fine finished to the fiber with less than 5 micron of diameter, which can be introduced to raw materials of modified and composite materials. Aluminum fiber can be used as Modified plastics for LED light, Midified plastics shell for laptop, Noise isolation for high precision communication appliacation and Electronic noise isolation for communication cable.
Aluminum Fiber Tube,Aluminium Flexible Pipe,Small Aluminum Tubing,Lightweight Aluminum Tubing
Trumony Aluminum Limited , https://www.trumonyalu.com