In daily life, toilets are relatively easy to hang dirty. Choosing a good product can keep your toilet bowl longer and brighter.
Cano tile    Anwar bathroom
The main purchasing methods for toilets are classified into two types: "dry" and "wet".
Therefore, the first step in the dry process is to look at the shape and structure first, and the transition point of the department structure is relatively gentle. The general water flow will be stronger.
Second, look at the glaze quality, the quality of the glaze affects the smoothness of the surface of the product, in general, the relatively thin glaze products have big drawbacks, the probability of pinholes and uneven glaze on the surface is also relatively large. So should not choose.
When conditions permit, it is advisable to ask for water at the time of purchase in order to observe the water flow performance of the toilet and the flatness of the surface.
Wet observation first look at the contact area between the water and the toilet, which is related to the quality of the pollution, especially several dead spots that are easy to get dirty should pay more attention to it.
Once again, look at the lines of the water flow. If the leveling of the water indicates that the toilet is glazed and the holes are small, it is not easy to hide.
Finally, to see if there is a phenomenon of stagnant water that should not exist in the interior, we generally observe the inclination of about 5% in all directions in the horizontal plane. There is no phenomenon of stagnant water, because the toilet may exhibit a 5% or so tilt in normal construction or after a period of use. .
Sanitary building materials knowledge Zhongyu toilet toilet ld tiles
Phone Holder Stands,Sticky Sucker Phone Stand,Card Holder Silicone Phone Stand
Silicone Phone Accessories Co., Ltd. , http://www.cn-kitchenwares.com