Custom Viton Fluorocarbon Rubber Stopper

Custom viton fluorocarbon rubber stopper

1. Customized size, color
2. Good sealing property
Best compatibility with medicine
Less puncture fell crumbs
3. ISO9001 quality system
4. Manufacturer


Scope of application
It is suitable for the package of antibiotic powder injection preparation in pharmaceutical industry.
Executive standard
Adapt standards of YBB00042002 and YBB00052002

Specification
1)size: 20MM
2)OD of Flange: 18.80MM± 0.20MM
3)ID of Neck: 13.20MM± 0.10MM
4)Height of Flange: 3.30MM± 0.25MM
5)Total height: 8.80MM± 0.3MM


What Is a Rubber Stopper?

A rubber stopper is a small, tapered plug used to seal the openings of test tubes, flasks and other laboratory glassware.
Stoppers made of cork are also available for this purpose. However, rubber stoppers are preferable for applications
That require a tighter seal or a greater degree of chemical resistance.

Purpose

The primary purpose of a rubber stopper is to prevent a gas or liquid from escaping its container during a
Scientific experiment. Rubber stoppers can also prevent the contamination of samples by protecting the
Contents of laboratory glassware from air. Last, the use of rubber stoppers allows experimenters to shake or mix solutions without spilling them.

Shape

The standard stopper is cylindrical in shape, with a tapered bottom end. Some rubber stoppers contain one
Or two holes to allow the insertion of pipettes, tubing or test equipment (e. G., a thermometer).

Size

Rubber stoppers typically range in diameter from size 000 (0.5 inches) to size 16 (5 inches) at the top.
The tapered bottom end ranges from fivesixteenths to 3.5 inches. Smaller stoppers are appropriate for
Test tubes and similar glassware; Larger stoppers are appropriate for flasks and beakers.

Properties

The main properties that make rubber suitable for use as a laboratory stopper are its elasticity,
Chemical resistance and impermeability. Its elasticity allows it to form a tight seal against the inside
Of the glassware. Its chemical resistance makes it safe for use with many corrosive and otherwise
Reactive compounds. Its impermeability helps to prevent the escape of liquids and gases from the container.

Customized rubber products

1, Material: SILICONE, NBR, SBR, NR, HNBR, ACM, EPDM, IIR, EP, CR, SIL, FKM etc
2, Temperature resistance: -40° C to+350° C
3, Applications: Electronic field, industrial machine& equipment, house-hold appliance, tele-communication, automobile, medical equipment industry etc.
4, Colour and size: Any colour and size is according to your requirements.
5, Logo&Printing: According to your requirements.
6, Quality: ISO 9001: 2008, RoHS, FDA. UL.
7, Packing: Plastic bag carton box or special packing.
According to your requirements.
8, More than 10 years rubber products manufacture experience.
9, Production ability: 8 millions per week.
10. OEM or ODM are both welcomed
 





  Custom viton fluorocarbon rubber stopper

1. Customized size, color
2. Good sealing property
Best compatibility with medicine
Less puncture fell crumbs
3. ISO9001 quality system
4. Manufacturer


Scope of application
It is suitable for the package of antibiotic powder injection preparation in pharmaceutical industry.
Executive standard
Adapt standards of YBB00042002 and YBB00052002

Specification
1)size: 20MM
2)OD of Flange: 18.80MM± 0.20MM
3)ID of Neck: 13.20MM± 0.10MM
4)Height of Flange: 3.30MM± 0.25MM
5)Total height: 8.80MM± 0.3MM


What Is a Rubber Stopper?

A rubber stopper is a small, tapered plug used to seal the openings of test tubes, flasks and other laboratory glassware.
Stoppers made of cork are also available for this purpose. However, rubber stoppers are preferable for applications
That require a tighter seal or a greater degree of chemical resistance.

Purpose

The primary purpose of a rubber stopper is to prevent a gas or liquid from escaping its container during a
Scientific experiment. Rubber stoppers can also prevent the contamination of samples by protecting the
Contents of laboratory glassware from air. Last, the use of rubber stoppers allows experimenters to shake or mix solutions without spilling them.

Shape

The standard stopper is cylindrical in shape, with a tapered bottom end. Some rubber stoppers contain one
Or two holes to allow the insertion of pipettes, tubing or test equipment (e. G., a thermometer).

Size

Rubber stoppers typically range in diameter from size 000 (0.5 inches) to size 16 (5 inches) at the top.
The tapered bottom end ranges from fivesixteenths to 3.5 inches. Smaller stoppers are appropriate for
Test tubes and similar glassware; Larger stoppers are appropriate for flasks and beakers.

Properties

The main properties that make rubber suitable for use as a laboratory stopper are its elasticity,
Chemical resistance and impermeability. Its elasticity allows it to form a tight seal against the inside
Of the glassware. Its chemical resistance makes it safe for use with many corrosive and otherwise
Reactive compounds. Its impermeability helps to prevent the escape of liquids and gases from the container.

Customized rubber products

1, Material: SILICONE, NBR, SBR, NR, HNBR, ACM, EPDM, IIR, EP, CR, SIL, FKM etc
2, Temperature resistance: -40° C to+350° C
3, Applications: Electronic field, industrial machine& equipment, house-hold appliance, tele-communication, automobile, medical equipment industry etc.
4, Colour and size: Any colour and size is according to your requirements.
5, Logo&Printing: According to your requirements.
6, Quality: ISO 9001: 2008, RoHS, FDA. UL.
7, Packing: Plastic bag carton box or special packing.
According to your requirements.
8, More than 10 years rubber products manufacture experience.
9, Production ability: 8 millions per week.
10. OEM or ODM are both welcomed
 





 

PAR56 LED Pool Light

LEDER technology`s PAR56 LED Pool Light makes your Swimming Pool Colorful. Multiple colors and multiple combination colors. 7 static modes, 5 dynamic modes, 10-speed levels for 5 dynamic modes. You can choose any model you prefer by remote control, this Led pool spotlight made your life more colorful.The superior design allows for uniform light intensity and color while avoiding hot spots and glare.

We adopted high-grade stainless steel and excellent silica gel blue circle as a lamp body of the LED pool light, with an excellent waterproof sealing material, so quality is absolutely guaranteed.We also make sure the light from this RGB LED swimming pool light more uniform and bright. Used for both Fresh or saltwater pool.

Features:

• Excellent design

• Ecological protection

• Light intensity suitable

• Energy saving save electricity

• Quality guarantee

• Color temperature :3000k-6000K

• Adjustable angle: Rotating lens up to 130 degrees that allows for light distribution in the direction that best suits your space.

• Type of protection: IP20 /IP65 (Some models)

• Warranty:3 - 5 years

LED pool light is a new type of energy-saving and Landscape lights, which have been rapidly developed due to their power-saving and long life characteristics. Our LED underwater lights are widely used in lighting, pool-oriented lighting, green landscape lighting and some outdoor Fountain lighting.

We have rich production experience in lighting .Except Indoor Lighting product, we also offered other product in Outdoor Lighting ,such as LED Flood Light , LED Street Light , LED Inground Light, LED Spike Light & LED Bollard Light as so on .

Pool Light, LED Pool Light, LED Swimming Pool Light,PAR56 LED Pool Light

JIANGMEN LEDERLIGHT LIGHTING Co.,LTD , https://www.floodlightsled.com