Material selection, construction preparation, and how to construct are all important parts of the wall paint. In these construction processes, there are often some misunderstandings. These misunderstandings may be caused by habits or caused by unfamiliar materials and engineering. Here, Xiao Bian tells you about the common mistakes in the selection, construction and acceptance of the wall paint, allowing you to be smartly decorated.
Wisconsin   Baisha祺 solid wood furniture
First, material selection errors for the decoration to protect
In the construction of wall painting, the selection of paint is the primary task and an important factor that affects the entire construction process. Pick a good paint, so that the wall decoration is guaranteed. However, in the process of selecting paints, consumers often have the following misunderstandings. Today, Xiao Bian has carefully selected four misunderstandings for you to choose from. Let you be a savvy consumer.
Myth # 1: Blindly worried about paint environmental protection
As people pay more and more attention to health, many people are not afraid of counterfeit goods but are afraid of decoration pollution. When it comes to renovation pollution, many people immediately think of paint. Everyone believes that paints contain a large amount of toxic substances such as formaldehyde, benzene, and VOCs. Therefore, when choosing coatings, they are also very worried. But in fact, this concern is not necessary. Now that the safety of many coatings has reached a good level, consumers do not have to worry too much.
Weapons: In fact, many consumers worry about the environmental protection of paint can be said to be blind. Now most of the qualified interior wall coatings are safe, they are generally water-based coatings, environmental protection waterborne coatings produce less formaldehyde, benzene and other harmful substances, generally do little harm to the human body, as long as the interior ventilation attention to the decoration, can Effectively avoid these decoration pollution.
Myth 2: Brands that are overly concerned with paint
Many owners think that buying paints is good for buying well-known brands. Of course, well-known brands have certain quality guarantees, but they cannot blindly pursue brands. In fact, the quality and effectiveness of many ordinary brand products and well-known brand products are not much different, but there is a gap in prices. Reasonable choice of paint is the wise choice.
Weapons: When selecting paints, you should first understand the quality, reputation, and market conditions of various brands of paints on the Internet or other channels. With the same effect of paint, try to choose a more reasonable price brands.
Myth No. 3: Anti-crack Paint Must Crack
No matter how old the new house is, the phenomenon of wall cracking is very high. Many people are struggling to choose a good paint to solve the problem of cracking. Once there was a brand-name paint package that was shockingly written "Cracking Resistance". Many consumers think that as long as these paints are used, they can prevent cracking on the walls. In fact, this does not have much effect.
Weapon: A thin layer of paint film can actually prevent the occurrence of wall cracking, which is unlikely. The "elastic latex paint" currently on the market can generally only compensate for micro-cracks below 0.3 mm. If the wall is cracked, to solve these problems, it is best to use latex paint to make up, or use cement to make up the cracks, and then paint.
Second, construction errors can not be ignored so that the details are done
The construction process is the focus of the wall decoration, the construction details are done well, and the renovated wall looks beautiful and durable. However, there are many misunderstandings in the construction process. These misunderstandings are often committed by the owners and some inexperienced masters.
Myth # 1: The darker the paint brush, the darker the paint
Many people think that the more times a dark paint is applied, the darker the color will be. Therefore, when painting a wall, owners who want to deepen the color of the wall often require construction workers to brush several times more paint to make the wall look darker. In fact, this approach is incorrect.
Weapons: dark paint even if it is painted more than a dozen times, the color will not become deeper. Dark paint contains lower content of titanium dioxide, less covering power, and can be brushed several times more than light-colored paint, but generally it can be controlled in 5-6 times. Too many brushings increase the thickness of the wall paint, which in turn may cause surface cracking.
Myth 2: The paint must be filled with water to paint
Many people have the impression that the use of paint is that water must be added to brush off the paint. Therefore, many people add a lot of water before painting. This idea and practice are incorrect. In fact, any paint that does not add water can also be brushed off with a roller, but without adding water, it will leave a knurled print on the wall.
Weapons: In the wall painting construction, the general light-colored paint can be diluted with water and then painted. However, dark paint does not need to add more water, because its poor coverage, if you add water when rolling, it is easy to brush the wall. In this way, for the same area of ​​the wall, the amount of dark paint is double that of the light paint.
Myth #3: Spraying is thinner than rolling paint film
Many people believe that the spray paint film is thinner than the roll paint film. In fact, this view is not entirely correct. The thickness of the paint film depends on the number of times of construction and the amount of water added. There is no direct connection with the method of spraying or roller coating.
Weapons: spray paint is divided into two types: air spray and high pressure airless spray. In the same spray times, the air spray paint film is thinner than the roll paint film, but the high pressure airless spray paint film Instead, it is thicker than roll paint. Therefore, the thickness of the paint film is not directly related to the choice of spray or roll coating.
Myth 4: The more paints are used, the easier it is to paint off.
Some people think that the more times the wall is painted, the thicker the wall paint is, the easier it is to paint off. In fact, there is no direct relationship between the situation of brushing and the number of times of brushing. It is only related to the degree of humidity in the room.
Weapons: Coatings with normal quality will not fall out of paint even after brushing 10 times and 20 times. Only when the putty is wet and loose will cause the wall to lose paint. In this case, paint 1 - 2 times paint will fall. Brush the primer on the regular common wall again and paint it twice. If the dark paint can be brushed several times.
Third, the decoration mistakes make you feel at ease
Acceptance is a necessary procedure after completion of all construction work. There are many misunderstandings in the acceptance of paint on the wall. Often the homeowner decides to rework without knowing the situation. This wastes time and money. The following small series for your detailed acceptance of several common misunderstandings for the owners of reference.
Misunderstanding 1: The smoother the wall, the better
Wall construction generally uses two methods: roller coating and spraying. The smoother the spraying construction, the better. However, for roller coating construction, this is not the case. Normal roller coating tends to occur after roller coating. Therefore, the smoother the wall, the better it is not completely correct.
Weapons: Generally, the wall surface of the roller coating is printed with flowers. If the wall surface is particularly smooth, it may be caused by adding too much water to the paint. This will reduce the adhesion of the paint and reduce the paint on the wall. Protection ability. After the roll coating is applied, look at the knurled print on the wall for evenness and detail.
Misunderstanding 2: The smooth surface is smooth
Some people think that when they see a smooth wall, they think that the paint on the wall is very smooth. In fact, such a rough estimate is wrong, because the smoothness of the wall can not be easily seen with the naked eye.
Weapons: Hand light to check, generally use a wire to connect to a 200W light bulb, light bulb with a root of 80 cm long fine wood tied after you take the light bulb along the wall again, as long as the uneven wall Or particles can be seen, and then keep the lamp and wall spacing at about 10cm, and then use the naked eye to see if the yin and yang angle straight.
Myth 3: Problems with hand-painted white paint
Check the wall so that you can touch the wall with your hand. Sometimes when the hand is touched, many white powder will fall on the wall. At this time, the owner thinks that it is caused by problems in the coating or construction. In fact, this idea is not entirely correct, and powder off may not be caused by a paint problem.
Weapons: Falling powder on the wall is not necessarily a problem with paint. During the construction process, dust will adhere to the wall. After the construction, there will be powder dropping. This is actually knowledge dust. Just wipe it off with a clean towel or tweezers and you can solve it. The owner doesn't have to worry too much.
Myth 4: Ventilation Coatings Dry faster
After brushing the walls, many owners like to open the doors and windows, one to speed up the drying of the walls, and the other is to disperse paint odors, it seems that it is a double benefit approach. But is this true? But in fact, it's not. Especially in the dry areas in the north, if the paint drying time is too fast, the emulsion paint quickly loses water in a short period of time, it is easy to cause cracking of the wall surface, and finally had to be reworked.
Weapons: The correct approach is to open a small window to ensure the ventilation of the room under the premise of allowing the wall to dry completely within 1-2 days. Do not open doors and windows because of hurry to stay, this will give cracks to the paint surface.
Paint paint purchase construction acceptance three tree paint paint paint interior decoration window latex paint
Cold Heading Tee Nut are an economical method of fastening a metal mechanism to a component that is made of wood, plastic, particleboard, pressboard or for anchoring wooden components to each other . The row material is carbon steel or stainless steel (304/316).
Surface treatment:Zinc plated,plain,black
4 Prong T Nuts can be used in hard and soft woods.
Hebei Xinyu Metal Products Co.,Ltd is a ISO9001 cerificated enterprise,which specialize in
manufacturing and exporting Furniture Nuts .Product including
Wing Nuts , Hopper Feed T Nuts , Propeller Nuts , Weld Nuts , Pallet Nuts , Locking Nuts , Rivet Nuts , Doggie Tooth Washers , Steel Stamped Parts , Hopper Feed Rivet T Nuts , Metal Stamped Parts ,
T-Nuts For Cliff-Climbing,Furniture Nuts, Tee Nut For Rock Climbing holding, Insert Tee Nut ,Middle steel Zinc Plated Stamping Wing Nut, Auto Flat Plane Weld Nuts ,
Automobile Spot Welding Nut,Customer-Made Metal Stamping Parts, Cold Heading Tee Nuts ,Stainless Steel Butterfly Nuts, Furniture Eccentric Wheel , Cam Lock Furniture Nut .
Our key strength are custom made special fasteners according to drawing or sample .We have longer and stable business relationship with well-known companies from American, Poland,Germany,French and so on.In the future ,xinyu will continue focusing on innovation special designed products,becoming your most trusted partner.
Cold Heading Tee Nuts
Cold Heading Tee Nuts,Cold Heading Steel Zinc Plated Tee Nuts,Cold Heading 4 Pronged Tee Nuts,Cold Heading 2 Pronged Tee Nut,Zinc Plated Cold Heading Tee Nut
Hebei Xinyu Metal Products Co.,Ltd , http://www.t-nuts.net