 |
The total motor power of the two main propellers and two small propellers of this flying bicycle is 50 kW (about 68 hp). The lithium-ion polymer battery is mounted on a lightweight bicycle frame. The body is made of carbon fiber and the overall weight is 187 pounds.
A group of Czech engineers and hobbyists have proposed the manufacture of a flying bicycle that can rely on four battery-powered propellers to levitate over the road.
This bike only uses off-the-shelf parts. The team named "Design Your Dreams" transformed the original electric car into a two-wheeled multi-function "helicopter" that can take off and land vertically and sustain flying for 5 minutes in the air.
Take-off thrust comes from horizontally placed propellers. The total motor power of the two main propellers and the two small propeller stabilizers together is 50 kilowatts (about 68 horsepower). The lithium-ion polymer battery is mounted on a lightweight bicycle frame. The body is made of carbon fiber and the overall weight is 187 pounds.
The team is currently considering whether to buy off-the-shelf flight control systems from hovercraft manufacturers, or they could build them themselves. Their decision will ultimately be determined by the cost and benefit ratio, and it will be worthwhile to see if the existing control system will be retrofitted. Because the gas-liquid shock absorber is too heavy, this design utilizes special tires to mitigate the impact of returning to the ground.
There are several restrictions on this flying bike: the maximum load is the same as the weight of the car itself, which is around £ 187, and the entire device is too large for the bicycle lane.
The team said that they still have a lot of work to do - generating a three-dimensional model of the entire structure, assembling the flight control system, completing the assembly of the entire frame, and finally completing a physical model. The first test flight will be in August this year. The designers of the flying bike stated that this is just a concept car and they have no plans to actually produce it. This is a good thing for people on the walking path. (Compiled: Double Helix)
Euro Brace Post
Made of circular steel tube. Zinc-phosphated and powder coated in green RAL6005.
Packing: in cartons
Dia*Length(MM) Wall Thickness(MM)
32*1200 1.25
32*1500 1.25
32*1750 1.25
32*2000 1.25
32*2250 1.25
32*2500 1.25
34*1200 1.25
34*1500 1.25
34*1750 1.25
34*2000 1.25
34*2250 1.25
34*2500 1.25
38*1200 1.25
38*1500 1.25
38*1750 1.25
38*2000 1.25
38*2250 1.25
38*2500 1.25
Euro Brace Post
Euro Brace Post,Euro Fence Diagonal Brace Post,Euro Diagonal Brace Post ,Euro Mesh Fence Post
Dingzhou Hongye Wire And Metal Products Co., Ltd. , http://www.chinawiremetals.com