When the house is renovated, many owners will change the size of the house and change the original small apartment to a large apartment, so that it can be spacious. It is because of this idea that many people choose to remove the wall but you know the consequences of the removal of the load-bearing wall? That is unimaginable. Today, Xiaobian will come with everyone to see if the load-bearing wall can be removed and how to see if it is a load-bearing wall!
How do you see if it is a load-bearing wall?
One: How to distinguish the load-bearing wall?
The best way to distinguish the load-bearing walls is to look at the architectural drawings, but sometimes there is no relevant information in hand, which is mainly determined by the thickness of the body:
1 A wall with a thickness of 240 mm or more is a load-bearing wall.
2 Some walls that cannot be distinguished by thickness, such as the outer wall and the wall shared by the neighbors, are also load-bearing walls.
3 In the general brick-concrete structure, except for the partition wall of the bathroom and the kitchen, the partition wall is not the load-bearing wall.
In fact, the load-bearing wall is quite well-resolved, that is, to see your level of care. Knowing what the load-bearing wall is, let’s see if the load-bearing wall can be removed.
First of all, we must know the role of the load-bearing wall, weighed beams, columns and so on.
The load-bearing beam is the beam used to bear the weight inside the house. The beams of the frame structure are frame beams, some are side beams, some are secondary beams. Basically these beams are load-bearing beams. It is necessary to know that there are no "beams" for no reason.
The frame beams are load-bearing, and the main beam and the secondary beam are corresponding, both of which are frame beams. Only the two ends of the secondary beam are not connected to the pillars and are connected to the main beam.
Side beam, or edge banding. It is from the position and function of it, not a structural classification, in fact it is generally a secondary beam.
Some beams not only bear the weight, but also bear the pressure or pull. But as long as it is a beam, it is the main load-bearing structural member. The weight on the floor is transmitted to the beam, the beam is transmitted to the column, there is no beam, and the floor itself is paralyzed.
Can the load-bearing wall be removed?
In general, the load-bearing wall cannot be removed. And if you remove the load-bearing wall, your neighbor has the right to sue you and ask you to recover. Therefore, in order to be safe, do not dismantle the load-bearing wall.
Of course, there are also professional construction companies that can remove some load-bearing walls and then use the reinforcement methods such as planting bars and bonded steel to achieve the original bearing capacity, but the property should be approved before construction. After obtaining the approval of demolition again it is more secure.
3. Can the load-bearing wall open the door?
Aside from the legal level of constraints, from the technical point of view, of course, you can open the door, nothing more than to do the subsequent reinforcement work, usually used to strengthen the method is to use bonded steel or carbon fiber, but this reinforcement program and its demolition Construction work must be completed by a qualified unit, so that the effect is the best.
Moreover, if the property permits, it must be embedded in the channel, and the door should not be too wide, too wide door reinforcement can not be inserted. However, it is recommended not to knock the load-bearing wall, because it will have a certain degree of impact on the neighbors, so the decoration will not be carried out.
The most important point is the load-bearing wall. This wall can not only be removed, but also can not be used to open a large area of ​​the hole. If the load-bearing wall is removed, the result will be very painful. The above is the small loader today introduced for the load-bearing wall can be removed and how to see if the load-bearing wall is here to end, want to know more information, please continue to pay attention to the decoration home.
More related wonderful reading:
Can the non-bearing wall be demolished, and what effect does the non-bearing wall have?
What are the consequences of removing the load-bearing wall? How to remedy the load-bearing wall removal?
Precautions for removal of multiple load-bearing walls for hidden dangers of load-bearing walls
Home decoration, do not arbitrarily dismantle the wall, non-bearing wall, demolition
PP plastic, polypropylene, commonly known as "baijiao",Scientific name: polypropylene.
Description:
PP Plastic is a kind of semi crystalline material. It is more hard than PE and has a higher melting point. Due to the high crystallinity, the surface of the material stiffness and resistance to scratch characteristics very well. PP Plastic don't have the problem of environmental stress cracking.Polypropylene (PP Plastic) is a semi-crystalline thermoplastic.PP Plastichas high impact resistance, strong mechanical properties, resistance to many organic solvents and acid and alkali corrosion.
PP Plastic is widely used in industry and is one of the most common polymer materials.
Australian COINS are also made of polypropylene.
Polypropylene bonding:
K-720 is suitable for polypropylene PP plastic adhesion, suitable for large area plate lamination, high transparency, suitable for PP adhesion PP, PP adhesive PC, PP adhesive ABS,PP adhesive PVC, PP adhesive acrylic, PP sticky metal, PP stick wood.
K-7007 adhesion performance is roughly the same as k-720, light yellow and more economical.
K-620 is adhesive small area polypropylene PP glue, must be used with the k-650 treatment agent, the instant positioning, the strength is high.
Advantages:
1. Low density;
2. Heat resistance ;
3. Non deformation;
4. High stiffness;
5. High surface strength;
6. Good chemical stability;
7. Nontoxic and safe.
Disadvantage:
The main disadvantage of the fault polypropylene is that the high temperature rigidity is not enough, and the low temperature is brittle.
Poor environmental tolerance, outdoor use, easy to turn yellow and brittle.
Tensile strength of anisotropy, the products are easy to deform, continuous use of low temperature, high creep performance, and long - term load.
Poor printing performance.
Application:
1,Valve part, drinking water and sewage water pipe,
2,Sealing element, spraying carrier,
3,Corrosion-resistant trough and barrel, industrial applications that have acid and alkali-resistant requirement; wastewater and gas discharge equipment for industrial purpose,
4,Scrubbing tower, clean room, semiconductor plant and other related industrial equipment and machinery, food machinery and chopping board,
5,Electroplating process, toy part
Combustion characteristics: PP Plastic easy to burn, polypropylene from continue to burn after the fire, with the top of the flame is yellow, the bottom made in blue, with a small amount of smoke generated, burning melt dripping, and oil.
Specification: the thickness of PP sheet material can be produced from 0.3mm to 2mm, and the PP sheet material is of rolling material and width of 500-1000mm.
The thickness of the plate can be produced from 2mm to 200mm. The specification is 600*1200mm 1000*1000mm 1000* 2000mm. Other specifications can be customized as needed,and The diameter of the PP rod can be produced from 2mm to 250mm, the length is 1 meter, PP rod can be ordered to be more than 3 meters in length.
Color: white and black, other colors can be customized
Modified varieties: PP sheet have various enhancers and other auxiliaries can be added to make modified varieties, depending on the requirements
Storage methods:
Keep in tight, cool and dry place to ensure good ventilation
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
PP Plastic Sheet,Polypropylene Plastic Sheet,High Hardness PP Sheet,Non Deformation PP Sheet
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com